Electrónica MySQL Developers en busca de trabajo

  • Electrónica
  • MySQL
Sugerencias:
más

Países

Ubicación específica

Exámenes

Tarifa por hora (USD)

Puntaje

En línea

Mostrando 1088 resultados
  • Contratar     mos3d
Contratar     mos3d

    mos3d mos3d

    Egypt $25 USD / hora
    R&D Electronics Engineer ( Master Degree ✅ )
    Egypt
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes...
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes : 1-Micro-controllers with variant types like (Pic ,ARM, AVR , 8051) 2- development kits (Arduino, Mbed,Raspberry pi ) 3- Digtal design and Verification using (VHDL, Verilog and system Verilog) 4-FPGA prototyping using (Xillinx and Altera) FPGAs as well as 5-electronics hardware implementation 6-PCB design. 7- Programming languages: Python, C/C++, JavaScript, HTML, CSS. 8- Sensing : Wired(I2C, SPI, CAN, Modbus, MQTT, RS232/485, SNMP), Wireless(WiFi, BLE, RF, Xbee) sensor managements with Raspberry Pi/Arduino. I'm always committed with time and specifications for the required jobs and care about quality of delivered work menos
  • Contratar mos3d
  • Contratar     ifamsiddeeq
Contratar     ifamsiddeeq

    ifamsiddeeq ifamsiddeeq

    Sri Lanka $15 USD / hora
    Civil Engineer | Research Writer
    Sri Lanka
    2.5
    1 comentario 1 comentario $15 USD por hora
    I'm an expert in *Civil Engineering (Structural Analysis and Design) *Geotechnical engineering. *Research Writing. *Water resource engineering. I have more than 6 years of experience in this field. I am an energetic, ambitious...
    I'm an expert in *Civil Engineering (Structural Analysis and Design) *Geotechnical engineering. *Research Writing. *Water resource engineering. I have more than 6 years of experience in this field. I am an energetic, ambitious person who has developed a mature and responsible approach to any task that I undertake, or situations that I'm presented with. I expertise in **Structural Design **Fluid mechanics **Soil mechanics **Road design **Design of steel and Reinforced Concrete structures. **Piping System and Water/wastewater treatment. **Plumbing, Drainage and sewage etc. **GIS Proficient at Drafting in Auto CAD, Civil 3D, BIM Modelling with Revit, and Structural Analysis with SAP2000 and ETABS. Have Experience with Construction projects at planning, Quantity Estimating (QS), management, and at the creation of schedules, BOQ estimation and Drafting. I do All kind of Research writing, Report writing for all sectors with higher quality at a reasonable rate. I am highly skilled in research writing where I am flexible to do according to the client's wish. You will be highly satisfied with our WORK, QUALITY, RESPONSE toward the client and ON-TIME PROJECT DELIVERY. QUALITY IS MY PRIORITY! menos
  • Contratar ifamsiddeeq
  • Contratar     A5Alberto
Contratar     A5Alberto

    A5Alberto A5Alberto

    Mexico $22 USD / hora
    DOMO Integral Solutions
    Mexico
    5.1
    2 comentarios 2 comentarios $22 USD por hora
    I have been working in Continental Automotive Guadalajara and now in Queretaro, first as an intern, then as an Engineer Jr., then as Full Engineer, and then as Coordinator. I had the opportunity to develop myself and implement my knowledge in the technical part, but also in the management area. Nowadays I have my...
    I have been working in Continental Automotive Guadalajara and now in Queretaro, first as an intern, then as an Engineer Jr., then as Full Engineer, and then as Coordinator. I had the opportunity to develop myself and implement my knowledge in the technical part, but also in the management area. Nowadays I have my own company called DOMO Integral Solutions, which the main purpose consists of to integrate solutions created by a multidisciplinary team to completely fill the client's needs. Our activities include development, testing, manufacture, and prototyping. We combine almost 20 years of experience in different areas from industry, such as automotive development, PCB manufacture, drone design, telecommunications, business management, etc. Nowadays my job consists of combine both sides (technical and management), be responsible for people and achieve goals for projects, always maintaining high standards of quality. menos
  • Contratar A5Alberto
  • Contratar     Manoj3050
Contratar     Manoj3050

    Manoj3050 Manoj3050

    Sri Lanka $20 USD / hora
    Delivering professional qulaity work with passion
    Sri Lanka
    I am an Electronics and Telecommunication Engineer from SriLanka. Currently I'm employed at world leading VLSI design company. I am expertised in embedded systems developing based on mictrocontrollers such as Arduino NodeMCU ESP8266 PIC Atmel as well as embedded computers such as Raspberry pi PCDuino I have the...
    I am an Electronics and Telecommunication Engineer from SriLanka. Currently I'm employed at world leading VLSI design company. I am expertised in embedded systems developing based on mictrocontrollers such as Arduino NodeMCU ESP8266 PIC Atmel as well as embedded computers such as Raspberry pi PCDuino I have the ability to simulate electronic circuits using Proteus, MATLAB. Also I'm experitesed in Android Applicaiton development for IOT(Internet of Things) products. For IOT projects, I can create Server applicaitons using PHP and Java with the nice UI9User interface) using HTML and CSS. I can work on following areas. Arduino Programming Writing Arduino Library Robotics UART (RS232) Communication,I2C,SPI,OneWire Using Sensors IR, GPS, Ultrasonic, Sharp, motion,temperature Using GPRS,GSM,WiFi,Ethernet,Bluetooth,RF (nRF) Using LCD, Touch display, TFT display Using RFID readers/writers Using finger print sensors Android app development Java desktop/Server programming PHP menos
  • Contratar Manoj3050
  • Contratar     sajjadtaghvaeifr
Contratar     sajjadtaghvaeifr

    sajjadtaghvaeifr sajjadtaghvaeifr

    Japan $15 USD / hora
    PhD in Mechanical Engineering
    Japan
    2.3
    1 comentario 1 comentario $15 USD por hora
    I have phd in mechanical engineering from department of bioengineering and robotics from Tohoku university and I lead a team of expert engineering with the following skills: Mechanical engineeing: Solidworks, Ansys, Mechanical design, Inventor, Autocad, Machine design, Matlab, Simulink, Vibration, Control,Stress...
    I have phd in mechanical engineering from department of bioengineering and robotics from Tohoku university and I lead a team of expert engineering with the following skills: Mechanical engineeing: Solidworks, Ansys, Mechanical design, Inventor, Autocad, Machine design, Matlab, Simulink, Vibration, Control,Stress analysis Electrical Engineering: Signal processing, Image processing, Power electronics, power transmission lines, Kalman filters, Electronics, Conrol systems, Identification Computer engineering: Programming with python, Java, cpp, neural networks, deep learning, convolutional neural network, artificial intelligence, object detection, web development menos
  • Contratar sajjadtaghvaeifr
  • Contratar     onpost
Contratar     onpost

    onpost onpost

    Russian Federation $19 USD / hora
    Firmware programmer
    Russian Federation
    I have been working in embedded programming for more than 12 years. Throughout my career I have developed firmware for UAVs, UGVs and other autonomous systems with multiple MCUs or DSPs. Implemented image processing for an optical navigating system. Digital signal processing. Math simulation of the systems under...
    I have been working in embedded programming for more than 12 years. Throughout my career I have developed firmware for UAVs, UGVs and other autonomous systems with multiple MCUs or DSPs. Implemented image processing for an optical navigating system. Digital signal processing. Math simulation of the systems under development in Matlab and Mathcad. I am experienced in firmware development for different MCUs and CPUs (including DSPs): Texas Instruments, STMicroelectronics (STM32, STM8), Microchip/Atmel (PIC, ATSAM, ATMega, including Arduino), SiLabs, Cypress, Analog Devices, NXP, Freescale, Renesas. Used IDEs are: IAR Embedded Workbench, Keil, Eclipse, AVR/Atmel Studio, Arduino IDE, MPLAB, Code Composer Studio, Simplicity Studio, Segger Embedded Studio, Atollic TrueStudio, PSoC Designer, CrossWorks, Raisonance Ride7. Programming languages: C, C++, Assembler (AVR, 8051, PIC, PowerPC), Matlab. menos
  • Contratar onpost
  • Contratar     dejanzivkovic93
Contratar     dejanzivkovic93

    dejanzivkovic93 dejanzivkovic93

    Serbia $30 USD / hora
    Professional Hardware & Firmware Developer
    Serbia
    Thank you for your kindly visiting to my summary. Control engineering & Electronics Expert, abundant experience in practical design and development of embedded systems for 10+ years. -- PCB design/manufacturing using Altium Designer and Eagle -Bluetooth and WiFi app & firmware development ESP8266&HC-05&ESP32 and...
    Thank you for your kindly visiting to my summary. Control engineering & Electronics Expert, abundant experience in practical design and development of embedded systems for 10+ years. -- PCB design/manufacturing using Altium Designer and Eagle -Bluetooth and WiFi app & firmware development ESP8266&HC-05&ESP32 and Arduino&Atemga&PIC&SAM&ARM&DSP - Robot & Motor Controlling - Vehicle Tracking using GPS and Accelerometer. - Signal processing based on FPGA and DSP - Sensor Application field such as Temperature, Light, IR,Pressure,etc - Control Engineering - Power Electronics - Electrical Engineering - PLC & SCADA -Microcontroller -Embedded Software -Software Development -Proteus => Design & Simulink & PCB Development tools: IAR,Keil,MPLAB-X,Micro C,Quartus,Arduino IDE,CCS, Atmel Studio, etc. Choose me and let's establish a long term relationship!!! menos
  • Contratar dejanzivkovic93
  • Contratar     romerorichard15
Contratar     romerorichard15

    romerorichard15 romerorichard15

    United States $60 USD / hora
    Electronics/Medical Device/Reverse Engineer
    United States
    4.7
    3 comentarios 3 comentarios $60 USD por hora
    Hello. As an Electronics Engineer, I have 5+ years of experience in Medical & Smart Device Engineering and IoT Development. I have developed many projects like smart devices with PPG, ECG, and Fingerprint Payment System. Moreover, I am good at the reverse engineering with Programming Languages and PCBs. Electronics...
    Hello. As an Electronics Engineer, I have 5+ years of experience in Medical & Smart Device Engineering and IoT Development. I have developed many projects like smart devices with PPG, ECG, and Fingerprint Payment System. Moreover, I am good at the reverse engineering with Programming Languages and PCBs. Electronics Engineering: - PCB Design: Altium, Eagle, KiCAD, and Allegro/OrCAD - Firmware Programming: Embedded C, Python, Verilog/VHDL - CPU: FPGA(Altera, Xilinx), PLC, PIC, Atmega, Arm, DSP, ESP32, Nordic Medical & Smart Device Engineering: - PPG, ECG, EEG - Ventilizer - Fingerprint Payment System, GPS Tracking, Voice Recognition IoT Development: - Mobile/Desktop Apps with Devices - Machine Learning - React Native, Swift, Android Reverse Engineering: - IDA, Ollydbg, WinHex, CFF Explorer - Assembly Languages: Mips, Mplab Assembly, Arm Assembly, x86/64 Assembly, Raspberry Pi Assembly - Reverse Engineering with Electronics: PCB Reverse, Firmware Reverse, R&D techniques I only work with the clients who want the highest qualities. Because I think the quality is very important for Electronics Engineering. I will always provide the perfect result to the clients, so you can be always satisfy with my result. Plz, contact me for your project with the best result. Regards. menos
  • Contratar romerorichard15
  • Contratar     ivanweinreb
Contratar     ivanweinreb

    ivanweinreb ivanweinreb

    Venezuela $50 USD / hora
    3d Artist - Creative - Product Designer - Bookwriter
    Venezuela
    4.6
    1 comentario 1 comentario $50 USD por hora
    Top 1% ranked Computer graphics 3D CAD/CAM expert here on freelancer. I can research and design any idea and have many tools to get that idea to reality. I´ve been working on Research & Development for 17 years now. I use Blender, ZBrush, Inventor, Fusion360 and any other software to model and visualize...
    Top 1% ranked Computer graphics 3D CAD/CAM expert here on freelancer. I can research and design any idea and have many tools to get that idea to reality. I´ve been working on Research & Development for 17 years now. I use Blender, ZBrush, Inventor, Fusion360 and any other software to model and visualize products and ideas. My clients have included Hewlett Packard, Procter & Gamble and NASA. Nevertheless, you don´t have to be an expert on design to work with me, if you speak English or Spanish, value your project and want to learn and create, I´m your guy. If you have experience, we probably will get along very well too. I have been working through the years on diverse industries, from faucets to medical prototypes to real spaceship technology. Fulfilling 100% satisfaction on every project is an important part of every deal. If your project needs quality and you are prepared to invest in quality, I am your best choice. menos
  • Contratar ivanweinreb
  • Contratar     anatolyzimin
Contratar     anatolyzimin

    anatolyzimin anatolyzimin

    Russian Federation $30 USD / hora
    Embedded Developer and IoT Expert
    Russian Federation
    5.8
    7 comentarios 7 comentarios $30 USD por hora
    High competencies in indoor positiong (IPS) and real time locating systems (RTLS), using UWB, CSS, LoRa, BLE. Strong IoT expertise: design devices with low power consumption; LoRa and NB-IoT enabled, Network and Application servers deployment and management. 4+ years as a Project Manager and Team Lead. 9+ years...
    High competencies in indoor positiong (IPS) and real time locating systems (RTLS), using UWB, CSS, LoRa, BLE. Strong IoT expertise: design devices with low power consumption; LoRa and NB-IoT enabled, Network and Application servers deployment and management. 4+ years as a Project Manager and Team Lead. 9+ years experience in embedded development as developer: -- Microwave radars (up to 72 GHz) for obstacle detection and self-driving vehicles -- Up to 10 layers PCB design -- RF PCB design up to 6 GHz -- Wide experience with LoRaWAN in the USA and EU. BLE, Wi-Fi, SX1280 ranging and localization, DecaWave DW1000 ranging and localization, ISM band -- Low-Power devices -- Ultrasonic/Optical distance measure devices -- Atmel/Microchip AVR and ARM SAM, STM32, Intel D2000, FPGA Altera, E-CAD IDEs: Altium Designer, Eagle SW IDEs: Keil, Eclipse, Atmel Studio, Arduino Mechanical skills: -- Design cases for electronic devices and other mechanical things with AutoCAD and Inventor -- 3D printing Other skills: -- Jira Project Management -- Bitbucket -- C/C++, Python -- PyQt -- Front-end and back-end with Django -- MATLAB -- Image processing -- Machine Learning menos
  • Contratar anatolyzimin

Hola , aquí encontrarás algunos freelancers fuera de línea

Hola , aquí encontrarás algunos freelancers fuera de línea que coinciden con ""