Diseño industrial Jobs

Looking for expert/specialist who will make proper material take off list for our country house or BVN ( or similar) files to Hundegger cutting machine. Alternatively proper material take off list with material dimensions ( in mm) and all other details in order to build that country house on my own. Feel free to ask more details. DWG files also available on request. I expect person who is familiar with such works and can support with ideas and proposals.

I need a custom RC dirtbike frame designed specifically for off-road use. The frame should have: - Material: Plastic - Design: Symmetrical and durable - Functionality: front and rear Suspension for rough terrain Ideal skills and experience: - Expertise in designing and fabricating plastic frames - Knowledge of suspension systems for off-road vehicles - Experience with durable design principles Also just experience with RC frames, dirt bikes and cars in general I will also need to be able to print it in multiple parts as my 3-D printer specifically the Bambu lab A1mini only has an 18 cm x 18 cm x 18 cm build area. I will give sizes and photos of all of my current components that will be going inside of the bike if you’re interested in helping. but the components it is a brushless m...

I need a licensed traffic/transport engineer to confirm that a 12.5 m Heavy Rigid Vehicle (the AS2890.2 design vehicle) can safely enter, manoeuvre within, and exit our construction site. A clean CAD survey (DWG) is ready to share. The job • Model the vehicle strictly to AS2890.2. • Run swept-path tests on the supplied plan, highlighting entry, turning, loading, and exit movements. • If the first pass is non-compliant, adjust the vehicle envelope within AS allowances and re-test until a practicable, safe solution is found. • Mark up any required kerb modifications, widening, or line-marking changes directly on the drawing. Deliverables • Marked-up plan set in PDF and DWG, clearly showing paths, clearances, and conflict points. • Brief technical memo ...

I need an experienced EOT (Electric Overhead Traveling) crane designer to create a heavy lifting crane with a maximum load capacity of up to 10 tons. The crane will operate indoors. Key Requirements: - Design for heavy lifting up to 10 tons - Suitable for indoor operation - Compliance with safety and industry standards - Detailed design drawings and specifications Ideal Skills and Experience: - Proven experience in EOT crane design - Strong understanding of engineering principles and safety regulations - Proficiency in CAD software - Excellent attention to detail and problem-solving skills Bids should include relevant experience and a portfolio of similar projects. Looking forward to your proposals!

My home is an older residence and I need a qualified structural engineer to confirm its overall physical soundness. The house has been standing for decades, so age-related wear is my main worry. Scope Please carry out a full on-site analysis that covers load paths, member capacity, material condition and any signs of settlement or fatigue. I’m especially concerned about: • Walls/Columns • Roof/Ceiling • Foundation What I expect from you – Visual inspection supported by measurements and, if needed, nondestructive testing. – Calculations or modelling in software you trust (SAP2000, STAAD, ETABS, or similar) to quantify safety factors. – A concise written report with photos, annotated sketches or CAD mark-ups, and clear recommendations r...

I want to bring the versatility of an IGT (Iron Grill Table) into a fresh, original camping table concept and need a complete product design I can hand straight to a fabricator. Think Snow Peak-style modularity: interchangeable panels, cook-top or sink inserts, legs that pack down small yet feel rock solid once assembled. I have not fixed the material, surface finish or extra features, so feel free to explore aluminium, stainless, hardwood, or a smart mix of them, and show me how weight, strength and packability balance out. Here is what I need from you: • 3-D CAD model and fully dimensioned drawings (STEP or SolidWorks native plus DXF for laser/water-jet parts). • Exploded view with a clear bill of materials so I can cost each component. • Quick renders that illustrat...

I’m taking a smart, retractable dog leash from concept to manufacturable product and need a seasoned mechanical CAD specialist to own the design phase. The core requirement is a rock-solid, long-life retraction mechanism built around composite components so the leash stays light in the hand yet stands up to daily yanks and weather. Beyond that primary function, the finished model must also support: • Adjustable length control with a positive-locking thumb switch • An ergonomic, ambidextrous handle that distributes pull evenly • A flush-fitting waste-bag holder sized for standard rolls * Powerbank You’ll start from my sketches and usage notes, translate them into a fully detailed 3D assembly, run basic motion/strength checks, and hand back: – Nati...

I have permit-ready architectural drawings for a steel building complex in Alabama and now need the foundation portion engineered, detailed, and sealed by a Professional Engineer licensed in the state. The structure includes: • 65' × 130' enclosed storage / shop area built in pre-engineered steel • 65' × 16' open lean-to on one gable end • 37' × 70' steel frame living quarters attached to one side of the main building Foundation preferences are already set: a slab-on-grade system for the main shop and lean-to, and a perimeter footing with stem wall under the living quarters to accommodate utilities and framing transitions. The site is level with predominantly sandy soil, so please base your calculations on that bear...

I want to bring the versatility of an IGT (Iron Grill Table) into a fresh, original camping table concept and need a complete product design I can hand straight to a fabricator. Think Snow Peak-style modularity: interchangeable panels, cook-top or sink inserts, legs that pack down small yet feel rock solid once assembled. I have not fixed the material, surface finish or extra features, so feel free to explore aluminium, stainless, hardwood, or a smart mix of them, and show me how weight, strength and packability balance out. Here is what I need from you: • 3-D CAD model and fully dimensioned drawings (STEP or SolidWorks native plus DXF for laser/water-jet parts). • Exploded view with a clear bill of materials so I can cost each component. • Quick renders that illustrat...

I am looking for an experienced Structural/Mechanical Engineer to design a robust, high-performance solar pergola to be installed on a flat roof in Tripoli, Greece. This is a high-wind and snow-load area (altitude 650m), so structural integrity is the top priority. The Concept: A Triple-Tilt BIPV (Building Integrated Photovoltaic) structure designed to maximize winter yield and provide a shaded outdoor space. The structure will support 24 Huasun Himalaya HJT Bifacial Panels (approx. 450W-460W each). Key Specifications: Total Dimensions: 6.00m (Width) x 6.50m (Depth/Length). (about) Panel Dimensions: 1722mm x 1134mm x 30mm (~22kg each). Structure Material: Steel (IPE longitudinal rafters, RHS columns), hot-dip galvanized. Geometries (Triple-Tilt): Main Body: 15 Panels (3 rows of 5) at...

Project Description I am developing a compact handheld mechanical device that transitions between two physical size configurations. The device must: • Collapse into a short, compact configuration • Extend into a longer ergonomic handheld configuration • Use a deliberate twist action to lock in both positions • Remain durable and mechanically stable in both states • Be compact, lightweight, and suitable for field use The mechanism should not rely on springs or automatic deployment. The transition between positions should be manual and intentional. The device will ultimately attach to a wearable platform, but the focus of this stage is the device body and locking mechanism, not the wearable system. Materials under consideration include: • aluminum • ...

I'm seeking a skilled engineer to design a low clearance vacuum truck tank, specifically for liquid waste collection. The design must comply with local regulatory standards. Key Requirements: - Concept development for the vacuum truck tank. - Detailed shop drawings for manufacturing. - Adherence to local regulatory standards. Ideal Skills and Experience: - Experience in designing specialized vehicles. - Knowledge of waste collection industry requirements. - Proficiency in creating detailed engineering drawings. - Familiarity with local regulatory standards for waste collection vehicles. If you have a background in vehicle design and a strong understanding of waste management systems, I would love to hear from you.

I’d like you to carry out a complete structural study for a single reinforced beam and show, in one concise package, how it performs under the specified service loads. The goal is to know two things with confidence: • the beam’s ultimate load-carrying capacity • the maximum deflection at mid-span and how it compares with code-permitted limits I will supply span length, cross-section geometry, load combinations and any code I must comply with once we start. If an FEA package such as SAP2000, ANSYS, STAAD, or Robot will speed things up, feel free to use it—just attach the native model alongside clear hand or spreadsheet calculations so I can verify the results independently. Whether the beam ends up being steel, concrete or a composite section depends on t...

I'm looking for a skilled metalworking tool design expert to create a metal circular saw specifically for cutting aluminum. This tool will be used for personal projects. Requirements: - Ability to design a robust and efficient metal circular saw - Experience with tools specifically for cutting aluminum - Knowledge of safety features and ergonomic design - High-quality materials and durability are a must Ideal Skills and Experience: - Background in mechanical engineering or industrial design - Proven experience in designing cutting tools - Strong attention to detail and safety standards Please include a detailed project proposal in your application. Metal Circular Saw Cutting Process: Cold cutting process. Semi-finished products: Square material up to 40x40mm. Workpiece clam...

I need a qualified structural engineer to assess diagonal cracks on the walls of two properties we are detailing with following RICS level 2 surveys The survey should include: - Detailed inspection of all affected areas. - Identification of potential causes. - Recommendations for repair or mitigation. - A comprehensive report documenting findings. Ideal skills and experience: - Licensed structural engineer. - Experience with residential properties. - Strong analytical and report-writing skills.

I need a qualified structural engineer to assess diagonal cracks on the walls of two properties we are detailing with following RICS level 2 surveys The survey should include: - Detailed inspection of all affected areas. - Identification of potential causes. - Recommendations for repair or mitigation. - A comprehensive report documenting findings. Ideal skills and experience: - Licensed structural engineer. - Experience with residential properties. - Strong analytical and report-writing skills.

Job Description: Create accurate 3D CAD models of iron/steel cab structures using Rhino Produce manufacturing-ready drawings Apply proper tolerances, material specs, and fabrication methods Collaborate with engineering/fabrication teams to refine designs Requirements: Proven experience with Rhino or SolidWorks (or equivalent CAD tools) Strong background in metal/iron fabrication and structural design Ability to work from sketches, 2D drawings, or concept designs Attention to detail and adherence to manufacturing standards

All of the drawings, details, and structural calculations for my prefab accessory dwelling unit are ready to go—I simply need a California-licensed civil engineer to review them and add a professional stamp and signature. The project is a residential ADU that will be rented out, so the city’s submittal package must be airtight. Scope I will email you the full PDF set (plans, calcs, and any supporting documents). After your review, I’m looking for your digital stamp and signature on the sheets that require it, along with a short review letter confirming code compliance. Deliverables • Digitally stamped and signed plan set in PDF • One-page review/approval letter (PDF) • Any minor redline comments, if needed, returned in the same file Acceptance Cr...

As makers of bespoke sofas, I would like a set of clear, production-ready technical drawings for our custom-built sofas. The idea being is to create a document that both our clients and our upholstery team can read at a glance. Scope Ideally, each sofa model needs three orthographic views—top, side and front either on the same or on a single sheet. Every view must be dimensioned precisely so a carpenter can cut frames without guessing, yet still look clean enough to share with clients during approvals. Content to show • Accurate overall measurements and critical internal dimensions (seat height, arm thickness, back angle, etc.). Step-by-step assembly notes or fabric information is not required at this stage; the focus is on dimensions and clarity. Format A vector-based tec...

I need a Professional Engineer licensed in the United States to prepare, sign, and seal structural plans for two new concrete walls that will tie into two existing walls in a residential property. These additions are meant to extend our current living space, so the drawings must clearly show how the new concrete walls integrate with the present structure, carry loads, and satisfy the latest IRC/IBC requirements as well as any locally adopted amendments. You will receive field measurements, photos, and the original house plans (PDF/CAD). From this information, I expect a complete plan set suitable for immediate building-department submission, including structural notes, connection details, reinforcement schedules, and any calculation pages the reviewer might request. Deliverables: • ...

Remote Works Design Engineer Work Type Remote (Part-time or Full-time Contract) Project Locations Jordan & Iraq (remote design support) Role Summary We are looking for a Temporary Works Design Engineer who can work remotely and support engineering design for projects in Jordan and Iraq. The engineer will provide design calculations, drawings, and technical support for construction temporary works. Required Design Experience The engineer must have proven experience designing: Pile working platforms for piling rigs and heavy equipment Cofferdam systems (sheet piles, bracing, excavation support) Concrete formwork systems Thrust blocks for pipelines Responsibilities Prepare engineering calculations and design reports Produce AutoCAD drawings and technical sketches Review me...

I am finalising the structural scheme for a new industrial warehouse and need a fully-engineered steel truss solution that can reliably carry medium roof and service loads. Your package should include member sizing, connection details, and clear span optimisation so fabrication and erection can proceed without re-work. Please deliver: • Structural calculations that justify every section and connection • Editable CAD drawings (DWG) plus print-ready PDFs showing plan, elevation, sections, and details • A concise material take-off for procurement • A short design note summarising assumptions, load cases, and the code you followed I will review the calculations for consistency, check drawings against the architectural grid, and confirm that deflection and strengt...

I need a temporary works designer for underpinning, specifically design calculations. The method of underpinning will be mass concrete underpinning. Ideal Skills and Experience: - Expertise in temporary works design - Strong background in structural engineering - Experience with mass concrete underpinning methods - Proficient in design calculations for underpinning systems - Relevant certifications in inspection and safety Please provide a portfolio showcasing similar projects and relevant qualifications.

I'm seeking an experienced structural engineer to perform critical calculations for a low-rise hotel. The primary construction material will be steel. We are looking to increase height of lobby entrance as well as add a rooftop bar on the roof deck. Key requirements include: - Load-bearing calculations - Wind and seismic analysis - Foundation design Ideal candidates should have: - Proven expertise in steel structures - Experience with low-rise buildings - Strong knowledge of relevant codes and regulations - Ability to deliver precise and reliable calculations Please provide examples of similar work and relevant qualifications.

Potrzebuję regularnego wsparcia przy opracowywaniu rysunków produkcyjnych ramek z profili aluminiowych oraz towarzyszących części wycinanych laserowo z blach. Bazą jest dokumentacja otrzymywana od naszego klienta – Twoim zadaniem będzie przełożenie jej na jasne, kompletne pliki warsztatowe. Dostarczymy modele oraz modele ramek w Inventor lub SolidWorks z podstawowymi modyfikacjami. Praca polega na dostosowaniu ramek do zamówienia klienta oraz wykonaniu projektów części specjalnych - głównie blacha cięta i gięta. Wymagany format dla ramek pdf a na części metalowe DXF. Podsumowanie części ilości i typów przesyłane w Excel. W każdym rysunku powinny znaleźć się: • pełne wymiary, • oznaczenia elementów na gotowej ramce, Obieg pracy wy...

I'm seeking a Freelance structural engineer with a PI of £2million or over to develop detailed structural design for a residential building. I already have architectural plans ready for your reference, a good idea of the strucutral design we need. Key Requirements: - Expertise in structural design for residential buildings - Proficiency in interpreting and working with existing architectural plans - Knowledge of UK building regulations and standards - Strong analytical skills and attention to detail Ideal Skills & Experience: - Professional engineering degree and relevant certifications - Proven experience in residential structural design - Excellent communication skills for collaboration - Portfolio showcasing similar completed projects Submit your bids wi...

I am ready to move my mechanical wheel-end assembly from a rough concept to a fully filed U.S. and PCT application. To do that, I need the three cornerstone pieces of the submission produced to professional, examiner-ready quality: • Patent Claims – drafted to capture the inventive features and provide layered fallback positions. • Patent Description – a clear, enabling specification that aligns perfectly with the claims. • Patent Drawings – line-art illustrations prepared in strict accord with USPTO 37 CFR 1.84 so every figure number, margin, and line weight meets formal requirements. The concept is already sketched out, so you will start with my notes, preliminary sketches, and functional objectives, then refine them into a cohesive set of documents...

I have built several tractor-mounted boom extensions and now I want solid, engineer-backed numbers on exactly how much weight each point along the boom can safely handle. The boom is welded from a 3/8" side-steer plate and a 2-1/2" × 2-1/2" × 3/16" square tube. From the plate it runs straight for 10 ft, then kicks up at a 30° angle and continues another 2 ft, giving a total length of 11 ft 10 in. Its primary job is lifting pole-barn trusses, so the working load will sit in the 500–1,000 lb range. I don’t have to satisfy OSHA, ISO, or any other formal standard, but I do want a clear, defensible safety factor. What I need from you is a straightforward structural analysis—hand calculations, FEA, or a mix—that tells me: • Ma...