Find Jobs
Hire Freelancers

Device Design & High Volume Manufacturing

$750-4000 USD

Cerrado
Publicado hace más de 11 años

$750-4000 USD

Pagado a la entrega
We are looking for either a person or a team specialized on embedded design and high volume manufacturing to develop a system with the following sensors: - GPS module (accuracy 5-10 meters, 3-8 satellites - Hot and Cold start is not an issue - Can get up to one minute or more) - Digital camera (1280 * 720 or 1300 * 1040, autofocus, white balance) There should also be a DSP module included in case the camera does not take clear photos (stabilized and in-focus). This is an issue that can be extensively explained as soon as you get hired. Extra caution should be given to the consumption of the camera in the standby mode. - IR LEDs (for amplified night vision) - G-sensor (accelerometer) - (GSM/GPRS - Quad band GSM 850/900/1800/1900 MHz) - USB module (USB mini) (for communication and charging) - Wi-Fi module (its range should be up to 15 meters under normal conditions - this is also an issue that can be explained in detail if and when needed) - Either Lithium or LiPo Battery 750mAh (or more) 3.7V (or whatever fits in the dimensions given) The arising device should be charged approximately every 48 hours of constant use. We can provide many clarifications and project oriented explanations upon request. The whole system must have a REALLY LOW consumption. Every module should be able to work in a stand-by mode (as to lower the battery volume). The resulting board should fit approximately to the following dimensions : 26mm x 40mm x 8.4mm (Less is more!) We expect a full product design with all other aspects like the power supply and casing (if the overall price is not too high). We target to a price effective and durable product that can work 24/7. We are also open to use ready boards if it can fulfill our needs. The ideal candidate (be it a person or a whole team) should provide technical reports and full documentation when needed and according to the projects requirements. We expect a complete design (hardware design, schematics design, PCB design, EMI/EMC compliance) and 3 working prototypes. Should the interested candidates ask for more info, please understand that we will have to provide it ONLY UNDER a digitally signed Non-Disclosured (confidential) Agreement, binding both parts. Freelancers agree to keep details discussed through private messages and files confidential.
ID del proyecto: 1748058

Información sobre el proyecto

17 propuestas
Proyecto remoto
Activo hace 12 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
17 freelancers están ofertando un promedio de $4.797 USD por este trabajo
Avatar del usuario
Hi Thank you very much for your invitation. I can do this project for you. For more details, please see my PM. Thank you
$4.000 USD en 90 días
4,9 (52 comentarios)
0,0
0,0
Avatar del usuario
i have delivered projects of this scale for telecom domain.
$4.000 USD en 100 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Dear Sir, We are Reserach and Development company whose working area are : -Digital Motor Control -Analog Design -Electronic Design -Power Electronics -PCB design -Embedded system -Matlab -Simulation of hardware For each concept descriptions are as follows: Digital Motor Control: -3-phase induction motor vector control drive -Flux estimation algoritm generation -DSP(TMS320) implementation on motor drive -Low speed application -Torque and speed loop generation -Control algoritms Analog design -Low power distribution -Noissless special opamp based analog circuits -Analog filters -Orcad simulation of several circuits Electronic Design -RF transmitter and receiver -Bluetooh reader and transmitter -Magnetic reader Power Electronics -Implementation motor drive -AC/DC converter -DC-DC converter -Battery charger -Solar inverter -Renewable Energy simulations -Uninterruptle power supplies PCB design -Schematic design by Altium -PCB design by Altium -Power board design -SMPS board design Embedded system -PIC18,PIC24,PIC30 and dsPIC applications -Ardino -MSP430 -Atmel -DSP(Texas Instruments) -Renesas Matlab -Power Electronics simulation -Motor drive -Wind Energy -Solar Energy -Control applications Simulation of Hardware -Orcad Simulation(TI,National, Linear Tech, Maxim libraries) -LTI -National -Matlab Very important Note: References attached. Please look excel file to see projects which we made until now! Hido
$3.000 USD en 50 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Sir, We believe we can do it as mentioned. Regards Mandeesh Singh
$1.000 USD en 90 días
4,9 (3 comentarios)
0,0
0,0
Avatar del usuario
We as a team can do the hardware and the embedded software and deliver the working protos. More details can be send thru your PMB Regards Soma
$8.000 USD en 90 días
5,0 (1 comentario)
0,0
0,0
Avatar del usuario
Hello. Please see your PM. Regards.
$5.500 USD en 90 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
hi, i can help.
$8.000 USD en 120 días
4,8 (60 comentarios)
0,0
0,0
Avatar del usuario
Please have a look at the PM sent to you. Thanks, Charlie
$4.000 USD en 60 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Hi, thanks for your invit. **** BID FOR CLARIFICATION **** please check PMB
$750 USD en 2 días
5,0 (1 comentario)
0,0
0,0
Avatar del usuario
Hello. Thank you very much for your invitation. Please check PMB
$4.000 USD en 50 días
4,9 (14 comentarios)
0,0
0,0
Avatar del usuario
Nice to see good project here.I and my team is having good experience in embedded design both hardware and firmware.
$6.800 USD en 60 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
we are a embedded company working on automotive electronics and Multimedia, we can handle this project comfortably
$7.000 USD en 120 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
HI, I worked on fleet commander systems that have similar requirements. Thank I know the related problems and all components normally used for. No problem at all thank you in advance maurizio stefani
$4.500 USD en 30 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Please see the PM.
$5.500 USD en 40 días
5,0 (1 comentario)
0,0
0,0
Avatar del usuario
We have all the capabilities to do this work. For more details about us please check our profile and your private messages.
$6.000 USD en 45 días
5,0 (1 comentario)
0,0
0,0
Avatar del usuario
We will be able to deliver.
$6.000 USD en 75 días
0,0 (0 comentarios)
0,0
0,0

Sobre este cliente

Bandera de GREECE
CHANIA, Greece
5,0
20
Forma de pago verificada
Miembro desde sept 3, 2011

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.