Find Jobs
Hire Freelancers

Design and Build a PCB with components to Drive a Servo Motor

$30-250 USD

Terminado
Publicado hace casi 7 años

$30-250 USD

Pagado a la entrega
I am looking for an experienced engineer to design and implement a very small system to drive a servo motor. I have used off-the-shelf components to build the system but now need a low-cost solution to integrate everything on a single PCB. The system will perform two activities: (1) drive a small servo motor ([login to view URL]); and (2) turn on a small LED. The system should have the following parts: (1) battery; (2) Arduino controller; (3) servo motor; (4) LED; (5) push switch to turn it on and off, and (6) a microUSB charging port for the battery and a microUSB data port for Arduino (if can't be shared). Right now I use Pololu's A-star 32U4 micro controller. You should design a PCB board that likes a-star 32U4, not much larger than the a-star 32U4, and connects to all components through connectors. Soldering should be minimized. Space is an important constraint to satisfy. Thanks for bidding.
ID del proyecto: 14004891

Información sobre el proyecto

31 propuestas
Proyecto remoto
Activo hace 7 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
Adjudicado a:
Avatar del usuario
bid updated
$100 USD en 5 días
5,0 (7 comentarios)
3,5
3,5
Avatar del usuario
Project Details Statement of work: • Create Schematic and board layout using Altium Designer Milestones: • 100% of bid amount upon project completion Communication: • Daily updates provided on project status Design Phase with expected time (working days) to completion: (3 days) • Create Schematic and board layout • Send schematic pdf for review and make required changes • Complete Board Layout with approved schematic Completion • Deliver BOM, Gerbers, Altium Design files, and pictures of schematic and layout Previous Freelancer work was to design an Arduino 2560 compatible system that could measure rotating spindle speed of a shaft and provide Bluetooth support More previous examples of work can be provided Please contact me for further discussion My Name: Brad Bas Location: London, Ontario, Canada Education: Electronic Engineering Technician and Technologist Work: 26 Years experience Embedded System Design completing electronic projects for Railway equipment to custom robotic machinery. Design and build from concept to prototype to production delivery
$150 USD en 3 días
5,0 (3 comentarios)
3,3
3,3
31 freelancers están ofertando un promedio de $164 USD por este trabajo
Avatar del usuario
Hello dear I have experience in designing electronics circuits and can make your project. I will make your project practically on breadboard and will provide you circuit, code and PCB design along with gerber files. I will design your project using extra cheap and reliable components that will be beneficial for you if you are planning to make a commercial product.I also have experience in bluetooth modules and android apps development. I can also develop android app for you that will be able to control your project and you will be able to monitor your data. If you wish we can discuss in chat.
$200 USD en 3 días
4,9 (36 comentarios)
6,5
6,5
Avatar del usuario
Hi Sir, We are professional PCB designers. we can design you not only the very nice but very miniaturized and smart PCB that will suit your job to the best. We do our jobs in Eagle and Altium. We are expert in using such software. we will give you gerber files and BOM. We are professional engineers and developers who do such projects from the last eight years. We offer you our skills for this project at very low rates comparatively without compromising the quality of work. Let me introduce you to our company TURKTRONICS. We are TURKTRONICS. We are professional with 8+ years of experience in Circuit designs, PCB designs, embedded system solutions, mobile app development, programming and software development. We provide complete end to end solutions for all kind of development projects. IOT is our strong point. In this bid, prototyping and shipping cost is not included however paying extra slight of money to include prototypes. We have collaboration with Atechcircuits in Shenzhen China for excellent quality PCB manufacturing. We care about our clients and help them to get out of any potential problem throughout the projects and also give post completion technical support if ever required. We are very much looking forward to hear from you on this in coming days! Cheers!!! Ahmad Lead Technical Engineer TURKTRONICS An Internet of Things Company
$90 USD en 5 días
4,8 (48 comentarios)
6,5
6,5
Avatar del usuario
Hi, I hope you are doing well. I have expertise in PCB design and development. I have developed atmega32u4 based integrated battery management projects. I would like to discuss the project in more details. Looking Forward, Khawaja
$250 USD en 3 días
4,9 (67 comentarios)
6,4
6,4
Avatar del usuario
Hello...! I have experience design this project. Please contact me and we will discuss more. Looking forward reply from you. Have a good day..! Regards,
$150 USD en 3 días
5,0 (20 comentarios)
5,9
5,9
Avatar del usuario
A proposal has not yet been provided
$166 USD en 3 días
4,7 (60 comentarios)
5,9
5,9
Avatar del usuario
FREELANCER RECOMMENDED ------------------------------------------------------ Can help... I am an Expert... Lets Start! Please start a Discussion with me and we can get started from there... Please check the past projects I have handled and check my reviews for what employers have to say about my work... Can start right now...
$155 USD en 3 días
5,0 (9 comentarios)
5,1
5,1
Avatar del usuario
hello. I am electronics engineer and professional PCB designer. I would like to do this for you. we have to finalise schematic first. let me know if you want to discuss your design. thanks.
$222 USD en 15 días
5,0 (10 comentarios)
5,1
5,1
Avatar del usuario
hi there! Just confirming few points, Will you need (a) 2USB ports? (b) a charging circuit for the battery? (c) What would you push switch control? The LED/servo/ or switch the whole device itself? Thank you, I am fine with the size you request, i.e. 1″ × 0.6″, but need to review based on your recommendation for a charger circuit.
$250 USD en 7 días
5,0 (14 comentarios)
4,7
4,7
Avatar del usuario
Hi, Can you share your complete project requirements and BOM of your previous prototype(which to be reused)? About us: Micro-controllers we have worked on PIC, STM32, PSOC and AVR. Development kits and instruments available for testing purpose. For PCB designs we use KICAD. C#, LABVIEW, Python for GUI, Controlling or Datalogging purpose. Thanks and Regards, Santosh
$222 USD en 8 días
4,8 (5 comentarios)
4,0
4,0
Avatar del usuario
Hello. I undersatand your task. Microcontroller only 32u4 or I coud use mega328 for lower price. And What capacity of bettaries you need? It will be li-po or 18650 li-ion? I have lot expirience in pcb design and already worked with servous and this controller I coud do it fast and quality. Thanks.
$80 USD en 3 días
4,7 (14 comentarios)
3,9
3,9
Avatar del usuario
Hello, I am a Mechatronics Engineer, ready for your job sir, using latest software of pcbs making like EagleCad, Proteus and Altium, Do you need it a normal Pcb or double Layer or as Arduino Shield or microcontroller integrated in it, to be sure it will be ready before the 3 days, but 3 days is enough for discussions, Thank you, hope to win the job, and don't pay till it finished, Thank you.
$166 USD en 3 días
5,0 (2 comentarios)
2,9
2,9
Avatar del usuario
Hey there, I have a very good experience in pcb design and have been working on it past 2 years and have created many projects.I have read your description i can complete your work. If interested message me so that we can discuss it further.
$100 USD en 3 días
4,3 (4 comentarios)
3,2
3,2
Avatar del usuario
I’m a young engineer , working in electrical engineering and electronics industry. Embedded programming of Atmel microcontrollers' since 2015. Development of applications in C++ Java, MATLAB. Good experience in programming for Arduino, Raspberry Pi and usage wide range of sensors and devices. I work with an Engineering outsourcing firm founded by a group of young and talented engineers with vast spectrum of experiences and knowledge pertaining to Electronics design. we offer a diversity of expertise in all areas of Engineering and Industrial Manufacturing with the best prices on the market
$75 USD en 7 días
5,0 (2 comentarios)
2,2
2,2
Avatar del usuario
its an easy and cheap project i will do it within minimum time for you and with the cheap rate its not such an expensive for which you are paying big amount what ever driving angle may be multi iwould do it for you
$66 USD en 2 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I am hardworking electrical engineer I do the projects for the sake of my own interest , as I love to make electronics stuff.i would love to do your project and will deliver you with your requirements and on time.
$133 USD en 3 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Dear sir You will get a complete set of technical documents including but not limited to, schematic, layout, gerber and excellon files. You will get technical assistance during and after implementation and test phases. Any remarks from your side will be considered with high importance. My main goal is your complete satisfaction. Dr. Eng. Aladdin Assisi
$155 USD en 5 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Hello! My name is Jackie. Currently, I am working as a hardware designer. I have joined many projects to design schematic and lay out PCB, such as: design development kit based on MCU 32 bit AT91SAM9G20B-CU and MPU A20 within NAND flash, SDRAM, Micro SD Card, Bluetooth module and Power supply unit. I am good at Altium, Allegro and have much experience of designing electronic circuit so I make sure to finish your project well. Do not hesitate to contact me. I am looking forward to hearing from you.
$133 USD en 5 días
0,0 (3 comentarios)
0,0
0,0
Avatar del usuario
Iam an electronics engineer from india. I have done some projects for research and development. I have done research document on 5G and also many projects on aurdino and iam perfect at soldering and good at micro soldering. I have done many projects with aurdino and also conducted workshops on it. I have work experience in a company for short time that to when iam pursuing my graduation, i have worked for a research IOT project. Now iam pursuing my graduation final year, but also i do some real time projects.
$155 USD en 3 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I have years of experience with designing circuits and developing PCBs. This project should not take more than a couple of days.
$277 USD en 3 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Hello! I have a good understanding of similar projects. I think still need to add a battery charge controller. You can discuss the details and begin. I'm ready!
$222 USD en 3 días
0,0 (0 comentarios)
0,0
0,0

Sobre este cliente

Bandera de UNITED STATES
Short Hills, United States
5,0
20
Forma de pago verificada
Miembro desde may 3, 2006

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.