Find Jobs
Hire Freelancers

Build a test platform

$1500-3000 USD

En curso
Publicado hace más de 5 años

$1500-3000 USD

Pagado a la entrega
Hi, I am looking for someone knowledgeable in CAN bus protocol for automotive applications and also proficient in python coding. I currently have an interface to run tests on the fuse box in the picture but I do not have anything to show me the results. Im looking to have a complete test platform built that can plug into the upper power plugs and give me a pass fail. I have the schematics and PCB layout for the upper power board however I do not have it for the lower logic board.... although I do not think it is necessary for this application. If you are interested in the job we can talk more in depth, if this job works out I have a few more projects I would like to get done as well. Thanks
ID del proyecto: 18147265

Información sobre el proyecto

18 propuestas
Proyecto remoto
Activo hace 5 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
Adjudicado a:
Avatar del usuario
Hello, Good day, I am Dhamodharan from India. I am interested in your job. I would like to discuss more about your requirement. My Experience: I have worked in Avionics ( cockpit display systems), Automotive (Engine control unit and its high speed production tester), industrial actuator Testing ( writing test sequence to simulate various operating conditions and fault conditions), LabView based tester development. I have good experience and knowledge in CAN, MODBUS, HART. I also worked in 4-20mA current loop devices. I have moderate level of at Phython script knowledge, but i will ensure that it will not be a limitation from my side. Additionally, I am a Embedded developer, hence i can develop a custom pcb if required. Also, I am very good at excel and VBA script. I can develop simple but powerful test application with Excel and VBA script for low cost applications(of course there are some limitations). I mostly use excel vba for automated result analysis and report generation. With above mention skills, i believe, i can deliver much better value for fuse box tester. Looking forward for your feedback. Regards Dhamodharan
$2.500 USD en 30 días
0,0 (0 comentarios)
0,0
0,0
18 freelancers están ofertando un promedio de $2.317 USD por este trabajo
Avatar del usuario
Hi I am experienced electronics engineer with more than 8 years of experience. I have experience in product development too Please get in touch to discuss more in detail Regards
$2.500 USD en 30 días
4,9 (254 comentarios)
7,9
7,9
Avatar del usuario
Dear Sir, I am an electrical engineer with 19 years experience in this area . I am interested in your project :Build a test platform
$3.666 USD en 30 días
4,7 (23 comentarios)
6,8
6,8
Avatar del usuario
Hello, Hope you are doing well. I can help with you in your project Build a test platform. I can assure you the quality job. I have good experience in Arduino, Electrical Engineering, Electronics, Microcontroller, Python. We have worked on several similar projects before! We have worked on 400+ Projects. Please check the profile reviews. I can deliver your job with in your deadline. Please ping me for more discussion. I can assure the 100% job satisfaction. Thanks,
$3.000 USD en 30 días
4,9 (50 comentarios)
6,3
6,3
Avatar del usuario
Hi there, I have checked the details I have rich experienced with Arduino, Electrical Engineering, Electronics, Microcontroller, Python. Please initiate chat so we can discuss this job.
$2.500 USD en 30 días
5,0 (5 comentarios)
5,9
5,9
Avatar del usuario
I have long experience with 8-bit , 16-bit and 32-bit micro-controllers. I work with Microchip (PIC) , Atmel (AVR , SAM) , ST (STM) , TI (MSP) , Nordic (nRF52), and NXP (LPC) micro-controllers. I use KEIL IDE , Atmel Studio , Code Composer Studio and MPLABX IDE . I deliver tested , neat and well-commented code that can be reused or modified for future development. I also have long experience with PCB design. I have worked with low-speed , high-speed and power boards. I use Altium Designer and Eagle, and I deliver neat layout that conforms to your dimension constraints and the manufacturing constraints. You can see samples of my previous work on my portfolio and youtube channel. More to be discussed once you contact me . BR, M.T.
$1.500 USD en 30 días
4,8 (39 comentarios)
6,0
6,0
Avatar del usuario
Hello! I am a python developer. I looked at your project and it seems interesting. I have all necessary skills required for this project. Ping me to discuss in detail.
$2.250 USD en 2 días
4,7 (34 comentarios)
5,6
5,6
Avatar del usuario
Hello, We have 15 years of work experience in manufacturing and have worked extensively in china, Apac countries and India. We have a Team of Designing and Developing Electronics Projects and have good experience is designing Multilayer PCB with greater experience in the relevant field. My Expertise: • Multilayer PCB up to 8 Layers • Electronics Board Design. • Expertise on various WorkBenchs / IDE . • Application Software with payment gateways. • RF Modules • Power Supplies • Control Circuits Our past product experiences includes: - Communication products on (Bluetooth, wifi, gsm-2g/3g/4g with and without gps, Lora, sigfox) - Commercial products (fully automatic top loading washing machine with fuzzy logic, smart microwave over, BLDC fans and compressor drives for air conditioners, Led lightings-home down lights, smart bulbs and tube lights, solar street lights and high bay lights) - Automotive products (tire pressure management systems, obd2, Bluetooth for infotainment, ev charging stations, BLDC drives, Battery management systems) - Utilities (water flow meters and Energy Meters) We have a production capacity to support international quality standards of production. We hence request-fully submit our proposal for your evaluation and reassure you of our quality and promptness. We also are willing to sign a long term freelancer support contract for your future needs as well. Awaiting your respon
$2.500 USD en 30 días
5,0 (3 comentarios)
4,7
4,7
Avatar del usuario
Hello! Thanks for your posting. I've read your post carefully and I am very interested in your project. I am an experienced and talented web developer and I have rich experience withArduino, Electrical Engineering, Electronics, Microcontroller, Python. I've understood what you want to do and I can complete your project perfectly on time. Thanks for your reading Pleas ping me to discuss more. Khuyag M. Best regards.
$2.500 USD en 30 días
4,8 (10 comentarios)
4,4
4,4
Avatar del usuario
Hi there! The project looks exciting but I have few questions so far. Is Python crucial for this project? I can do it in it but I assume that C will be more appropriate. If there will be some need in designing layout for lower board I can do that too but need to check if it really necessary. How about short call in order to discuss Thanks Andrew
$2.055 USD en 15 días
5,0 (2 comentarios)
4,4
4,4
Avatar del usuario
Good Day, We are a group of Computer Engineers with experience in both software and hardware development. Having the necessary experience and knowledge, we can help you out on your project. We have worked with CANbus protocol in my past projects. One was where we had to setup our own set of commands which should also work in parallel with components such as pump monitors that use CANbus to control. Another was to analyze the CAN bus of a certain motor, use those commands to control all functions of the motor using an arduino Hope to hear from you soon! Cheers!
$2.000 USD en 15 días
4,8 (21 comentarios)
4,0
4,0
Avatar del usuario
I worked on automotive embedded applications for 3 years designing software and hardware with CAN bus as the main communication interface, also I worked on building software tooling using python for automating similar tasks. I'd like to know more about the project in general, like what kind of tests you want to run (fuse check, relay on off check, etc) and if the board itself has capabilities to detect such things or it will be built into the testing board.
$2.500 USD en 40 días
4,8 (2 comentarios)
3,0
3,0
Avatar del usuario
Hello. How are you? I saw your description carefully and I’m a professional Web development expert guarantee the highest quality of the result I have made. I have many top skills like Arduino, Electrical Engineering, Electronics, Microcontroller, Python and so on. This job fits with my skill very much. As you will know as this work, I will produce the best results that accurately reflect your needs with good communication. I never disappoint my clients and I am able to lead your project to success and troubleshoot problems. I think I will be fitted to your project and looking to work together. Feel free to ask any query. Please leave a message in my inbox and let discuss your project. Looking forward to your good reply. Thank you. Best regards Sergey.
$2.500 USD en 30 días
4,4 (1 comentario)
2,8
2,8
Avatar del usuario
Hi Dear Sir/Madam I have MSC in electrical engineering. I have great experiences with the microcontrollers. I had don several projects by the CAN. I can do this job as well as possible
$2.230 USD en 30 días
0,0 (0 comentarios)
0,0
0,0

Sobre este cliente

Bandera de UNITED STATES
Los Angeles, United States
5,0
20
Forma de pago verificada
Miembro desde nov 3, 2010

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.