Materials Engineers para contratar

  • Ciencia de materiales
Sugerencias:
más

Países

Ubicación específica

Exámenes

Tarifa por hora (USD)

Puntaje

En línea

Mostrando 32 resultados
  • Contratar     govindasamyjgces
Contratar     govindasamyjgces
    Here i have listed some of my area of expertise Metallurgy /Materials Science Quality Assurance /Quality Inspection Heat Treatment Six Sigma /Problem Solving Failure Analysis ISO 9001/IATF 16949 /ISO 14001/OHSAS18001/ISO 27001/ISO 10002 /CQI-9 Supplier Sourcing /Product Sourcing Lean Management /TQM Steel...
    Here i have listed some of my area of expertise Metallurgy /Materials Science Quality Assurance /Quality Inspection Heat Treatment Six Sigma /Problem Solving Failure Analysis ISO 9001/IATF 16949 /ISO 14001/OHSAS18001/ISO 27001/ISO 10002 /CQI-9 Supplier Sourcing /Product Sourcing Lean Management /TQM Steel /Aluminium /Cast Iron Forging /Casting /Welding/Powder Metallurgy PPAP/Control Plan /FMEA Material Science Legal Research/ Legal Drafting Legal Consulting Contracts Commercial Law Securities law Regulatory Compliance Financial Advisor Business Plans Fundamental And Technical analysis Customized Legal documents for USA. UK. EU , India and other countries for Intellectual Property Rights - Trademarks, Patents, and Copyright Terms of Service Privacy Policy - ( Compliance of GDPR , CCPA ) Non-Disclosure Agreement Shareholder Agreement Lease Agreement Note : 24/7 customer support and unlimited iterations free of cost menos
  • Contratar govindasamyjgces
  • Contratar     penslingers06
Contratar     penslingers06

    penslingers06 penslingers06

    Pakistan $10 USD / hora
    Refreshes the writing Other Beers Cannot Reach
    Pakistan
    1.7
    1 comentario 1 comentario $10 USD por hora
    ✨بِسْمِ اللهِ الرَّحْمٰنِ الرَّحِيْمِ✨ ⭐⭐"In the name of the God,the most Gracious,the most Merciful"⭐⭐ ✒️"You can always edit a bad page;but you can't edit a blank page". I am associated since 2014 and have almost 7 years of working experience in the writing industry.Beside being an author extraordinary and having...
    ✨بِسْمِ اللهِ الرَّحْمٰنِ الرَّحِيْمِ✨ ⭐⭐"In the name of the God,the most Gracious,the most Merciful"⭐⭐ ✒️"You can always edit a bad page;but you can't edit a blank page". I am associated since 2014 and have almost 7 years of working experience in the writing industry.Beside being an author extraordinary and having a strong command in instructional and professional writing;I am also pretty much aware of formatting and reference styles that includes: ⭐APA(6th edition) ⭐MLA ⭐Harvard ⭐IEEE ⭐Chicago etc. Till now,I have also served more than 2500 clients including students seeking help for their assignments and tasks and helped them securing A+ grades. My priority is to provide my clients proper satisfaction for what they are desiring from me and I am always succeed in fulfilling their desires by providing them high grades quality work with 100% originality. ⭐⭐My strengths:⭐⭐ ⭐Thesis/Dissertations ⭐Essay writing ⭐Case studies ⭐Research/Technical Writing ⭐Report writing including lab reports ⭐Paragraph writing/Rewriting/Rephrase ⭐Literature review/Summaries/Bibliography ⭐Methodology ⭐PowerPoint Presentations/MS Excel ⭐Proofreading/Best editing My expertise: As having a hand on experience in professional writing and in social media contents,I also deal with; ⭐Blog writing ⭐Article writing ⭐Content writing ⭐All types of professional Reports ⭐Resumes/Cover letters ⭐Product reviews,Product descriptions and much more. "We don't want to push our ideas on the customers,we simply want to make what they want". My aim is to provide master piece works under the budget amount that will meet the need of my client because for me quality matters the most more than quantity. 100% satisfied results you will get with countless revisions until you have come up to your satisfaction!Also,I deal with different types of customized work depending on the demand of our clients. So,take back your seats,and leave the rest to me. Hopefully looking forward from you!!. Thank you! menos
  • Contratar penslingers06
  • Contratar     engmahmoudsayed
Contratar     engmahmoudsayed

    engmahmoudsayed engmahmoudsayed

    Egypt $30 USD / hora
    Where Design Meets Art
    Egypt
    4.4
    3 comentarios 3 comentarios $30 USD por hora
    Hello and welcome to Artors Innovations where we make high end design that help our client to achieve their goals and share their vision with the world. We are a group of creatives focused on 2 main sectors 1. architectural design and visualization. 2. product design and development. Our goal is to achieve...
    Hello and welcome to Artors Innovations where we make high end design that help our client to achieve their goals and share their vision with the world. We are a group of creatives focused on 2 main sectors 1. architectural design and visualization. 2. product design and development. Our goal is to achieve best quality for your design and make you full satisfied. We are always available for you and we love to to help! Just send us a message and we would respond immediately. menos
  • Contratar engmahmoudsayed
  • Contratar     proassignment
Contratar     proassignment

    proassignment proassignment

    Germany $35 USD / hora
    PhD Technical Writer, Entrepreneur and Consultant
    Germany
    2.4
    1 comentario 1 comentario $35 USD por hora
    A focused & task oriented leader and entrepreneur. Klaus combines multi-disciplinary tech environment know-how, with his immense product management skills and high research qualification experience. Klaus is a active and non-active board member of companies that exist in the real-world, revenues ranging from 1.4M $ to...
    A focused & task oriented leader and entrepreneur. Klaus combines multi-disciplinary tech environment know-how, with his immense product management skills and high research qualification experience. Klaus is a active and non-active board member of companies that exist in the real-world, revenues ranging from 1.4M $ to 49M $. Klaus is committed to the cause of sustainability, the environment and fully driven to empower startups, the planet and the future. My Ideal client: I enjoy working with entrepreneurs who showcase high level of commitment towards their idea, startup or SME. Developing a strong eye towards success, growth and personal development are essential. My main purpose on Freelancer: 1. Share my knowledge and mistakes to provide a more driven startup entrepreneur network 2. Learn and further develop my skillset from clients and prospective clients 3. Possible connection to investors, including myself, should the concept be ideal Main deliverables include: 1. Business Overview, Ideology, Purpose/Issue, Executive Summary 2. Company Goals and Management/Executive Team 3. Portfolio of Products and/or Services 4. Timeline to execution (pre-founding and post-founding) 5. Growth Timeline 6. Possible integration with IOT or AI (if applicable or scalable) 7. Marketing Plan including Service/Product offering, market size and market survey 8. Target Market including possible hot channels, online channels and offline channels 9. Financial forecast including Financial Projections, Cashflow Projection, NPV and Valuation 10. Competitors, Porters Five Forces and Brand Positioning 11. Sales Cycle, Go-To-Market Action Plan and Sales Process Flow 12. SWOT Additional categories need to be discussed and analyzed prior to execution of the project. My business plans are unique, non-conventional and will stand out ahead of investors, clients, landlords, banks, venture capitals and government entities. menos
  • Contratar proassignment
  • Contratar     villalbania
Contratar     villalbania

    villalbania villalbania

    Venezuela $20 USD / hora
    Doctorate in Engineering Sciences
    Venezuela
    2.0
    1 comentario 1 comentario $20 USD por hora
    Graduated in Chemical Engineering from Universidad Central de Venezuela. Master Degrees in Petroleum and Petrochemical at the French Institute of Petroleum. PhD Candidate in Engineering Sciences at the Central University of Venezuela. Researcher with more than ten years of experience in the area of catalysis and...
    Graduated in Chemical Engineering from Universidad Central de Venezuela. Master Degrees in Petroleum and Petrochemical at the French Institute of Petroleum. PhD Candidate in Engineering Sciences at the Central University of Venezuela. Researcher with more than ten years of experience in the area of catalysis and valorization of hydrocarbon and petrochemical streams, developing activities such as: i) execution of experimental tests at micro, bench and pilot scale, ii) synthesis of catalysts at micro, bench and pilot scale, iii) development of technical-economic feasibility studies, iv) development of process schemes, v) modeling and scaling of technologies, vi) technological surveillance and vii) specialized technical assistance of petrochemical plants. Author of 14 technical-scientific works in the area of catalysis, natural gas processing and current valorization for the production of petrochemical inputs. Advisor of 8 special degree works leading to Chemical Engineering and Petrochemical Engineering degrees. Classified as a Researcher A by the National Observatory of Science and Technology (ONCTI) of the Bolivarian Republic of Venezuela. Style reviewer, advisor on research planning and methodology. Editor of scientific journals. Translator English - Spanish, Spanish - English. menos
  • Contratar villalbania
  • Contratar     hamadaelmisy
Contratar     hamadaelmisy

    hamadaelmisy hamadaelmisy

    Egypt $10 USD / hora
    Mechanical Design Engineer
    Egypt
    2.3
    2 comentarios 2 comentarios $10 USD por hora
    Hi, Thank you for visiting my portfolio. I am a Mechanical Design Engineer, I have 5 years experience. I am a Certified and an Expert at Solidworks (CSWA & CSWP). I worked also by Ansys and Autocad. I designed and manufactured many machines before like:- CNC Machine, Packaging Machines, Mail Tray Transfer...
    Hi, Thank you for visiting my portfolio. I am a Mechanical Design Engineer, I have 5 years experience. I am a Certified and an Expert at Solidworks (CSWA & CSWP). I worked also by Ansys and Autocad. I designed and manufactured many machines before like:- CNC Machine, Packaging Machines, Mail Tray Transfer Machine, Postal Machine, Coil Winding Machine, Belt Linear Actuator, and Roller and Belt Conveyors. Also I have experience in Robotics, and Microcontrol. I did also many projects like Wall-E Robot, Line-Follower Robot and Smart Home. I speak Arabic and English. menos
  • Contratar hamadaelmisy
  • Contratar     akomoo
Contratar     akomoo

    akomoo akomoo

    India $5 USD / hora
    civil engineer
    India
    1.4
    1 comentario 1 comentario $5 USD por hora
    I have just started work in freelancer I can do with 100 USD but you have to give me a good rating. I work quickly and quality is my top priority.
    I have just started work in freelancer I can do with 100 USD but you have to give me a good rating. I work quickly and quality is my top priority. menos
  • Contratar akomoo
  • Contratar     KestanWriters
Contratar     KestanWriters

    KestanWriters KestanWriters

    Kenya $10 USD / hora
    A decorated freelancer with 10 years experience.
    Kenya
    0.8
    1 comentario 1 comentario $10 USD por hora
    My name is Stanley, I am a web researcher with more than 5 years of experience in the publishing industry, I am an excellent writer, proofreader, and editor. Over the years, I have worked on a vast range of tasks, from academic work to legal journals and weekly magazines. In the process also, I have been involved in...
    My name is Stanley, I am a web researcher with more than 5 years of experience in the publishing industry, I am an excellent writer, proofreader, and editor. Over the years, I have worked on a vast range of tasks, from academic work to legal journals and weekly magazines. In the process also, I have been involved in conducting a variety of activities that include researching, writing, commissioning, page layout, and subbing - most recently for an international publisher. I am currently working as a web content creator, marketing, and PR professional. I focus on several fields such as finance and economy, law, social sciences, religion, health, travel, agriculture, and the environment. I possess a very sharp and excellent eye for detail and offer a high-quality editing service for all types of documents. With my work, perfection is a primary factor, and my previous clients’ satisfaction is clear evidence of this. My most recent role, as a managing editor on a range of magazines for the entertainment tech scene, encompassed all of these tasks, along with page layout and website management. In addition to this, I have worked as a researcher and writer for legal publications. I have also been a chief sub-editor for a range of magazines and journals covering the financial and property markets. My previous freelance experience includes academic proofreading. This has seen me tackle essays and theses covering various topics. Examples of these subjects are modern history, history of art, math, and the environment. Moving forward, I promise to deliver timely, well-researched, and well-articulated grammatically sound pieces. I take every assignment given to me with every bit of seriousness as if it were my own. Therefore, my clients normally rest easy when I am in charge. I look forward to working together. menos
  • Contratar KestanWriters
  • Contratar     ware910
Contratar     ware910

    ware910 ware910

    Venezuela $5 USD / hora
    Mechanical Engineer
    Venezuela
    1.0
    1 comentario 1 comentario $5 USD por hora
    Mechanical Engineer Cum Laude. Expert turning ideas and projects into reality. Extensive knowledge in mechanical design, CAD modeling, Matlab, Microsoft Excel and Google Sheets spreadsheets.
    Mechanical Engineer Cum Laude. Expert turning ideas and projects into reality. Extensive knowledge in mechanical design, CAD modeling, Matlab, Microsoft Excel and Google Sheets spreadsheets. menos
  • Contratar ware910
  • Contratar     karimankamal47
Contratar     karimankamal47

    karimankamal47 karimankamal47

    Egypt $30 USD / hora
    ✅ LICENSED CIVIL @ STRUCTURE ENGINEER IN USA ✅
    Egypt
    3.1
    1 comentario 1 comentario $30 USD por hora
    WE ARE (CIVIL @STRUCTURE @ARCHITECTURE @ MECHANICAL @ ELECTRICAL) ENGINEERS and teaching assistants in the faculty of engineering we have designed and detailed many buildings with ✅ (USA Codes) ✅British Codes ✅Euro Codes ✅Indian code ✅Australian Code) We have 7 year experience in ✅⭕ Reinforced concrete...
    WE ARE (CIVIL @STRUCTURE @ARCHITECTURE @ MECHANICAL @ ELECTRICAL) ENGINEERS and teaching assistants in the faculty of engineering we have designed and detailed many buildings with ✅ (USA Codes) ✅British Codes ✅Euro Codes ✅Indian code ✅Australian Code) We have 7 year experience in ✅⭕ Reinforced concrete buildings ✅⭕ lumber (timber) buildings ✅⭕Steel buildings ======================================================================== ?We can provide stamp and sign for LICENSED ENGINEER at any state in the USA, so you can provide to city to get a permit ??% ✅ Architecture drawing ✅ Civil drawing ✅ Structure drawing ✅ Plumping drawing (MEP) and HVAC ✅ Electrical drawing ✅ Shop drawing (fabrication drawing ) ✅drainage drawings (hydraulic .hydrology .fluid mechanics ) ========================================================================click on (hire kariman) to contact with us Best regard menos
  • Contratar karimankamal47

Hola , aquí encontrarás algunos freelancers fuera de línea

Hola , aquí encontrarás algunos freelancers fuera de línea que coinciden con ""