Microprocessor and microcontrollertrabajos

Prototype Unit, using Microcontroller or Arduino, to control the delivery of CO2 gas, through a solenoid valve, according to the supplied protocols of Volume and dispatch time. Development of the programming software of the PIC or Arduino.

Captación de proyectos de automatización (Adquision de datos, SCADA, Microcontroller) y clientes potenciales, para la industria, particularmente Food&Beverage.

Microsoft-Excel,Word,Powerpoint,Java, data entry,Matlab Coding,DSP,Microprocessor,Signal

I'm in need of an electronic circuit and PCB designer proficient in working with ESP32 based microcontrollers, particularly for IoT applications. The project involves creating an efficient, compact, and robust PCB design that supports Wi-Fi connectivity. Key Requirements: - Proficiency in ESP32 based microcontroller design - Prior experience with IoT applications - Familiarity with designing for low power consumption - Expertise in creating compact PCB layouts - Ability to design a PCB for a rugged environment Your expertise in these areas is crucial, as the final product should be both functional and durable. If you're confident in your ability to deliver a high-quality electronic circuit and PCB design for an ESP32 based microcontroller...

...will be a two-lane track device, with the ability to dictate the start and end of races, as well as display grades systematically. Key Features Needed: - Start Line Servo: To exhibit a complete rotation signaling the race's commencement. - Finish Line Infrared Sensors: These will be strategically positioned to detect the end of the competition. - Two-Lane Implementation: The structure should accommodate a dual lane setup. - Display: 7-Segment LED HT16K33 Backpack above each lane to show timing results. - Winner Identification Feature: An 8x8 matrix screen for indicating 1st and 2nd place finishes. Ideal Skills and Qualifications: - Working knowledge of Arduino programming language. - In-depth understanding of microcontroller-based systems. - Hands-on e...

Develop schematics, PCB and firmware for a compact NFC reader. The suggested RFID controller is PN7160. Microcontroller - STM32 0) Two boards - antenna and the main board. The antenna diameter is 15mm with a hole in the center 4-5mm. The main board is 14mm in width and length is 35mm or less. 1) The reader must read and write password-protected memory blocks in Mifare Classic cards. 2) The reader keeps the password for the RFID cards as a hard-coded constant. 3) The reader has an 4-byte reader ID stored in its EEPROM memory. 4) The RGB LED on the edge of the main board, whose location matches the hole in the antenna. RGB LEDs are connected to the PWM pins of the controller. 5) A waterproof (if possible) speaker must be on the opposite edge of the main bo...

I'm seeking a skilled embedded software developer who's proficient in C, C++ and Python to create a custom solution for a microcontroller-based system. The primary focus of this project is the successful implementation of various communication protocols on the embedded software. Key Responsibilities: - Develop an embedded software running on a microcontroller - Implementation of communication protocols within the software - Testing and debugging of the software for optimum performance Ideal Skills and Experience: - Proficient in C, C++, and Python - Previous experience in embedded software development - Familiarity with microcontroller systems - Strong understanding of various communication protocols Please include any relevant...

I'm in need of an expert in digital electronics to assist in a project of mine. The specifics of the project, including whether it involves circuit design, PCB layout, or microcontroller programming, we can discuss in further detail. Key requirements: - Proficient with digital electronics and related technologies - Experience with either circuit design, PCB layout, or microcontroller programming - Ability to collaborate effectively and share project files as needed Your role will be instrumental in the success of this project, and I am looking for someone with a proven track record in this field. Let's connect and discuss the project further.

Adjust 5 - 12 v dc with digital potentiometer and RF module . Simple project . Microcontroller based

...intermediate-level programmer with experience in Embedded C and 8051 Microcontroller. The project involves designing a system that takes input from 3 sensors and controls an actuator (motor). Key Requirements: - Design a system on 8051 Microcontroller - Program the system in Embedded C - 3 sensor inputs and motor output - Intermediate experience level - Assist in sourcing necessary components I have a strong preference for someone who has worked with 8051 Microcontroller and has experience with designing systems that integrates sensor inputs and actuator outputs. Your role will involve both programming and assisting in recommending and sourcing the necessary sensors and actuator for this project. If you�...

...needing to control a Nema17 stepper motor and 300watt BLDC Motor. -I already have the motors selected and the drivers for each motor. -I am wanting to use an arduino microcontroller for the controls. -I require the power supply to be as small as possible, but still being well within in a safe range of the power demand of the system. Refer to addition info regarding the sizing, or have a discussion with me on possibilities. -Additional peripheral components: 3 x Push Button, 1 x power switch, 1 x small display screen. 2 x Limit switches. What I need done. I need a freelancer to design and spec the unspecified components around the ones that are already spec'd. You will need to spec the PSU, and design the PCB board for the micro controlle...

...development for a specific STM32 microcontroller model. - Application/Use Case: While not specified, the project likely involves a real-world application within the realm of consumer electronics, industrial automation, or wearable devices. Skills & Experience: - Prior experience with STM32 microcontrollers is essential. - Proficiency in utilizing various communication protocols (e.g. UART, SPI) and integrating sensors would be a plus. - Familiarity with power management techniques is highly desirable. - Experience with the specific STM32 model is needed to ensure optimal performance and compatibility. - A background in the chosen application domain (consumer electronics, industrial automation, or wearable devices) would be beneficial. If you've worked o...

...seeking a well-experienced developer who understands STM32 and IoT. This job focuses primarily on Ethernet connectivity to achieve optimal functionality. While not necessary I will favor developers who have the hardware at hand and can test themselves before finalizing the project. Any prior experience in Embedded development, File transfer, Network communication would be an added bonus. Key objectives are as follows: - Establish Websocket connection to public domain - With Wiznet W5500 and STM32 microcontroller. The ideal candidate should have: - Proficiency in Wiznet development - Proficiency in STM32 development - Extensive experience with Ethernet connectivity - Understanding of data transfer speeds and protocols. - STM32 and W5500...

I looking for someone to design a PCB to include an MCU, Wifi module, and some headers Key Requirements: - The PCB should have an STM32 microcontroller (MCU) to carry out basic functions. - The design should incorporate an ESP32 Wi-Fi module for internet connectivity and a motor controller. - The complexity of the project is minimal. Deliverable: Using EasyEDA to design the PCB, I ask to receive a copy of the project, Gerber files, BOM, Pick and Place, and any other files required to manufacture the PCB. Ideal Freelancer: - Proficient in PCB design. - Experience with integrating MCUs and Wi-Fi modules. - Able to deliver a simple, no-frills design that works effectively. Please provide me with your quotes and examples of relevant proje...

I'm in need of a programmer who is skilled in C++, Python, and has experience with PIC Kit 2 microcontroller. The job entails both programming the PIC Kit 2 and working on a specific project involving its application. Ideal Skills and Experience: - Proficiency in C++ and Python. - In-depth understanding of microcontrollers, with specific experience in PIC Kit 2. - Previous experience in programming PIC Kit 2 specifically. - Ability to work on a project involving PIC Kit 2. -Ability to understand PLC logic along with programming. Please note that I'm looking for someone with a strong background in these areas, as the project may involve complex programming tasks. If you believe you have the necessary skills and experience, kindly reach o...

...the NUCLEO-G491RE model) and ESP32 microcontrollers (specifically the ESP32-DEVKITC-32UE). It needs a certain amount of inputs and outputs to begin with, but also minimum 2 outputs with PWM-control or analog 0-5V, as the motorcontroller of choice works with PWM or 0-5V inputs. Also 2 analog inputs 0-5V for 2 kinds of safety edges. Find also the list of peripherals in the attachment. The pulse generated by the motorcontroller won’t exceed 500 Hz with our current motor/motorcontroller configuration. (see peripheral list: section motorcontroller) In total we need to have: Digital inputs: 12 Digital fast inputs (counter): 2 Analog inputs: 2 Digital outputs: 6 Analog outputs: 2 Key deliverable: A fully programmed NUCLEO-G491RE STM32 and ESP32-DEVKITC-32UE micr...

I am seeking a seasoned PCB designer for my upcoming project. The project involves the design of a double-sided PCB to be used in an embedded system for a power electronics, consumer product. Key requirements a...design for embedded systems - Experience with power electronics The primary function of this PCB is power management. Thus, proficiency in optimizing PCB designs for energy efficiency is highly desirable. The PCB should include the following features/components: - Microcontroller - Voltage regulator - Display interface - Resistance - Capacitor - Diodes - Integrated Circuits - Transistor - IGBT - MOSFET Experience in integrating these components on a double-sided PCB is mandatory. Please detail your related experience and skills in your bid. Looking forward to ...

I'm looking for experienced circuit designer who can design sensing circuit for RTD temperature sensor. Sensing should be done by STM32F103 microcontroller ADC. There should be 8 channels for RTD temperature sensor. I need Schematic design and sample code to read temperature value. Only bid if you have experience with RTD temperature sensor.

...hardware via Bluetooth and communicate with an ESP32/similar microcontroller. Also design a PCB to integrate the microcontroller with the machine's electronically operated devices. - Design: I don't have a specific design in mind, so I'd need your help with designing the app. - Design: Design a pcb to integrate microcontroller and other electronically operated features. - Functionality: The key functionality of the app will be to control the LEDs on the machine. More specifically, I'd like the LEDs to be used to scan an object. Ideal skills and experience for this job include: - Proficient in Android app development - Experience with Bluetooth integration - Familiarity with ESP32 or similar microcontrollers - UI/UX design ...

I need a freelancer skilled in microcontrollers, specifically with the IMXMRT1062. - I require the embedded flash memory program file to be read, for the purpose of debugging. - I am currently using the MCUXpresso IDE with the microcontroller. - The task will involve not only identifying issues, but also providing guidance on how to resolve them. Ideal skills for this project include: - Proficiency with microcontroller programming, particularly IMXMRT1062 - Experience with the MCUXpresso IDE - Debugging skills - The ability to provide clear and concise guidance on issue resolution.

I am working on a project to develop a wireless sensor for vibration analysis. I have already defined some components of the system. I need someone with experience in electronic component design to help me evaluate the chosen components and assess the feasibility of applying these components in a prototype. This person will be responsible for the PCB's technical design (Gerber and CAD) and prototype testing. The hardware design must consider hardware and firmware (software) limitations. My initial idea is to use a Seeed Studio microcontroller controlling different types of accelerometers. If the person has a better approach, I have no problem following their advice. Below is a list of the components I am considering using in this project: Sensors:

I'm in need of an Arduino Programmer with expertise in DC motor control, programming logic, and inductive proximity sensor integration. Specific tasks include: - Programming logic for the DC motor microcontroller - Integrating an inductive proximity sensor for object detection - Implementing a speed regulation function (slow start, slow stop, foward, reverse speed and delay start) for motor control Please find the project detail on the attached document.

I'm looking for a professional programmer who specializes in IC programming, specifically for smoke detectors. Key Tasks Include: - Reading and writing IC data for smoke detectors. - Handling and operating microcontroller IC chips effectively. The ideal candidate should have: - Solid experience in IC programming. - In-depth knowledge of microcontroller IC chips. - An understanding of smoke detector systems is a plus. Knowing how to troubleshoot and debug chips will offer a huge advantage. Please respond with examples of related projects you've completed and your approach to tasks like this.

I'm looking for a skilled professional to simulate & test of my microcontroller based hardware design, using proteus and test its performance. Also, if there is any performance bugs, need to correct it and also, build pcb prototype and physically test the performance

As a project manager requiring embedded software engineering, I need qualified candidates to handle firmware development, device driver programming, as well as embedded systems testing and debugging. The target platform is a microcontroller and the primarily language utilized will be C. Ideal Skills and Experience: - Proficient with C programming language - Extensive experience and understanding of firmware development - Competence in device driver programming - Proven background in embedded systems troubleshooting and debugging - Familiar with microcontroller platform

I need a PCB for controlling the residential electric current (220VAC) using the following componenets: - ESP32 as microcontroller -1 relay 3VD/220AC as an actuator - LoRa module (SX1278) to communicate with others equipments (already developed and manufactured). - RTC module (DS3231) for getting timeStamp. - An AC/DC currrent transofrmer (220VAC/12VDC) is needed to feed the entire circuit from the same electric source we are controling. - 2 voltage regulator: 12/5VDC and 5/3.3VDC I've design several measurements devices using ESP32, LoRa , RTC to create a monitoring net. This is a first control device that will be inluded. So there are a lot of material that this work can lean on.

...specific and interesting project. Key Requirements: - Utilize a crash sensor micro switch: This element is the core of the project as it's designed to respond to an impact and trigger a series of events. - Trigger a 12v motor: The motor should start running as soon as the sensor detects an impact. - Simultaneously play a short MP3 file: The audio should begin playing once the sensor is activated, but it should be less than 30 seconds in duration. - Activate a solenoid latch: This component is crucial as it performs a critical function in the project. The solenoid latch should be triggered once the motor is on and the music is playing. - Stop the music and motor: Once the solenoid latch has been activated, the MP3 player and motor should ...

I'm looking for an experienced IoT developer who can create an Arduino-based system that triggers actions or alerts based on scraped text data from a website. Key Responsibilities: - Develop a system using Arduino, Raspberry Pi, and ESP32 microcontroller - Implement website scraping functionality to extract specific text content - Design a mechanism to trigger predefined actions or alerts based on the scraped data Ideal Experience: - Proficient in Arduino programming - Familiarity with ESP32 microcontroller and Raspberry Pi - Experience with website scraping techniques - Ability to integrate scraped data to trigger actions or alerts on an IoT system Please note that my preferred programming language wasn't specified. Feel free to suggest the most a...

...my circuit design utilizing a SAMD51 microcontroller, I'm in need of expert assistance to address some issues with my current PCB design. I have the existing design and fab files at hand, but the project has not achieved its full functionality. - Key Issues: The circuit is experiencing power supply issues presumed to stem from the Voltage regulator, compatibility issues with the microcontroller, and an unresponsive USB output. These are the primary targets for debugging and solution creation. - Ideal Expertise: I am seeking an experienced engineer knowledgeable in PCB design, solar power modules, and the SAMD51 microcontroller. The individual must have a track record of troubleshooting and resolving power supply issues, ...

...possess stellar skills in: - Microcontroller-based circuit design. - Magnetic levitation systems. - Power efficiency management. The project doesn't require utmost power efficiency, a basic level would suffice. Although compact, this tiny maglev motor device should be firm and durable with functionality on par with larger models. A prototype, design files and instructions for assembly/testing will be essential deliverables. Previous experience working on similar miniaturized projects would be advantageous. Your ingenuity will be crucial in the success of this project. Let’s chat more about how you can help bring my vision to life. This magnetic levitation motor is used on a pump body. The size of the motor is about 15cm × 15cm, which can achieve...

I'm seeking an expert proficient at designing and developing a joystick controller and driver unit for application in the biomedical technology sector. Key Requirements: - The product should be compatible with medical equipment in a way that it can seamlessly drive a 24V wheelchair. - The joystick controller and the driver unit should be a complete, integrated system. Communication Interface: - I prefer a programmable microcontroller and driver unit that can communicate with UART communication protocol Ideal Skills: - Proficiency in industrial product design, especially joystick controllers and driver units. - Experience in medical technology will be a valuable asset. - Knowledge in wired communication protocols like UART is essential ...

...intricate hardware developer with technical mastery to custom design an isolated encoder signal splitter board that's compatible with Arduino micro-controller, specifically ATmega2560. Key Features: 1. Voltage Isolation: The board must feature voltage isolation to ensure safe transmissions. 2. Compatibility: It must be fully interoperable with Arduino libraries which serves as a platform for expansion and experimentation. 3. Signal Amplification: the board should not draw more current than pull-up resistors for incremental encoders connection. If required, a signal amplification needs to be implemented. Standard signal voltage is 5V DC. Main Purpose: 1. Noise Reduction: It should provide clear communication by suppressing ambient noise in the signal. There is a 23V AC 16...

...microchip to control multiple DC motors and MOSFETs, with integrated voltage regulation. This project requires expertise in high-power applications, voltage regulation, and serial communications. Project Requirements: Microcontroller: RP2040 chip to manage all operations. Power Handling: Board must handle input of 24V. Voltage Regulation: Conversion of 24V input to 12V and 5V outputs. MOSFETs: 5 MOSFETs for 24V, 7A control. 4 MOSFETs for 12V, 5A control. Communication: USB Type-C for robust serial communication. Inputs and Outputs: 2 analog inputs. 1 One Wire communication interface. Additional pins for digital input/output as required. Deliverables: Complete PCB design files ready for manufacturing, including gerber files. Schematic capturing an...

I'm looking for an ESP32 expert to help me with a project that involves utilizing both inputs/outputs and write a code in C language The project requires 7 inputs and 6 outputs. - Inputs : Time Temp sensor probe Soil moisture sensor VPD sensor PH sensor EC sensor Water level sensor - Output : 2 x Peristaltic pumps 2 x 12v pumps AC Fan (PWM-controlled EC-motor) 220v water motor pump (using Solid State Relay) inputs/outputs will need to be set up and configured and based on the reading of the input sensors the Microcontroller will control the outputs. The successful freelancer will...

I'm in need of an experienced developer who can help me write a code for interfacing a 16x2 LCD and RC522 RFID sensor with the Megawin MG82F6D17 microcontroller. The ideal freelancer should be proficient in: - Interfacing the LCD and RC522 sensor with the MG82F6D17 microcontroller - Implementing basic text display features on the LCD - Reading ID data from the RFID tags with the RC522 sensor A deep understanding of microcontrollers and RFID technology is a must for this project. The final code should reliably display the ID data from the RFID tags on the LCD.

...an ARM Cortex microcontroller. The ideal candidate should be proficient in C/C++ programming languages. Key Requirements: - Embedded Software Development: The primary task for this project is to design, implement, and debug the embedded software. Please have a proven track record of working with embedded systems. - ARM Cortex Experience: Familiarity with ARM Cortex microcontrollers is crucial. You should be comfortable with the architecture and able to optimize performance for the given use case. - C/C++ Proficiency: Strong programming skills in C/C++ are a must. You will be developing applications on this platform, so experience in these languages is critical. Your responsibilities will include: - Designing and developing embedded software for an ARM C...

Feel free to ask any questions for clarity. Need assistance to connect my ESP32-2432 microcontroller to my Windows system. With an intermediate level experience, I need guidance and walkthrough for the overall process. The final goal is to create software able to: - Load PDF files stored locally on the microcontroller - View these PDFs - Provide annotation capabilities to these PDFs The ideal freelancer: - Is proficient with ESP32-2432 microcontrollers - Has extensive knowledge in software development for embedded systems, particularly with PDF viewer development - Strong understanding of memory management on these devices - Excellence in explaining technical details and instructions in a simple, clear fashion.

...professional to create a microcontroller program for me. Here is a quick run down of the requirements: 1. Hardware: This project involves the use of a TI DRV10970EVM board and the TI LAUNCHXL-F280049C. 2. Programming: The program needs to be written in C. 3. Functionality: The program should be able to accept an integer input that represents a torque value. This input would then be used to adjust the speed of a small motor controlled by the DRV10970. 4. Signal Control: I'm unsure of the type of signal that should be used to control the motor speed(PWM, Digital, Analog). Therefore, I am open to suggestions on this aspect. It would be great if you can provide your expert advice here. 5. I would also appreciate help/schamtics on how to connect the two boards (...

...understands STM32 and IoT. This job focuses primarily on Ethernet connectivity to achieve optimal functionality. Key objectives are as follows: - Establish Websocket connection to public domain - With Wiznet W5500 and STM32 microcontroller. It's not necessary for this project, but any prior experience in File transfer, Network communication, and Remote device management would be an added bonus. The ideal candidate should have: - Proficiency in Wiznet development - Proficiency in STM32 development - Extensive experience with Ethernet connectivity - Understanding of data transfer speeds. Your job will be to write an optimal code, preferably in STM32CUBEIDE or Keil MDK Arm. The Wiznet W5500 is connected to STM32 via SPI, it should connect to ethe...

...for a small project using the ESP32 microcontroller. This project involves controlling both Line In and Line Out audio through an amplifier. The schematic for this setup will be provided to you. Project Details: Microcontroller: ESP32 Functionality: Control Line In and Line Out audio via an amplifier Additional Component: Integration of an MP3 module, which is to be triggered by AT commands and also through Serial communication. Deliverables: Complete PCB design files ready for manufacturing, including Gerber files, BOM, and assembly drawings. Requirements: Proven experience in PCB design and electronic circuit design. Proficient in using PCB design software (please specify which software you are familiar with). Ability to work with pr...

Por favor, regístrate o inicia sesión para ver los detalles.

...efficient board that carries 1 to 16 chips (ASIC, FPGA, and/or Microcontrollers) is expected, with the ability to handle 5V (200W) Max. Strong expertise in Electrical Engineering and experience in designing a 4 layer PCB board is preferable; those with a background in cryptocurrency technology hold a significant advantage. Deliverables include the final working PCB prototype model. Reliability, accuracy, and attention to detail are crucial for this project. - BOM File has to be provided - CPL & Gerber files has to be provided - NEEDS to be cost-effective for mass production - Any mining algorithm should/could be programmable - Considerable high hashrate is expected - Raspberry Pi 3/4/5, ESP32xxx, Arduino or any other microcontroller can be used The main...

I need a skilled microcontroller programmer with experience in working with the ESP32 specifically. The main aim of this project is to control and navigate drones using the ESP32. The ideal freelancer for this project should have: - Proficiency in ESP32 programming - Experience with drone control and navigation - Knowledge of wireless communication protocols - A solid understanding of microcontroller systems - Previous experience with similar projects would be a plus The project will entail: - Developing a reliable system to control and navigate drones using the ESP32 - Ensuring the system is responsive, stable, and capable of managing a drone's movements effectively This project requires attention to detail and a high level of techn...

I need a talented developer to assist in integrating a motor with an ESP32 microcontroller. Here are the project specifics: - Actuator: Tinymovr Axion A1 - Communication Protocol: The ESP32 should communicate with the CAN bus using the CAN @ 1mbps - Toolset: I require the project to be developed using the Arduino using Arduino tinymovr library. The ideal candidate for this project will have a background in microcontroller programming, specifically with the ESP32, and demonstrable experience with motor control. Prior experience with the CAN FD protocol and the Arduino framework will be highly beneficial.

...an STM32 microcontroller. The program should integrate a sensor for distance measurement and the data should be processed for monitoring purposes. Key Requirements: - Develop a program for an STM32 microcontroller that seamlessly integrates a distance measurement sensor. - The program should be designed to continuously monitor the distance values received from the sensor. - The data collected should be easily accessible for further processing and monitoring. - The program should be efficient and optimized for the STM32 platform. Ideal Skills and Experience: - Proficiency in programming for STM32 microcontrollers. - Experience in integrating sensors to microcontrollers. - Previous projects involving data logging and monit...

I'm looking for a talented professional who has experience in designing LCD displays Modules, specifically for automotive dashboard use. The display I need is in the medium size range (3 to 7 inches) segmented...the medium size range (3 to 7 inches) segmented HTN/FSTN technology. The critical feature that sets this project apart is the BOM cost of the final product should be very Low without compromising on the quality. Skills and experience that would be ideal for this project include: - Strong background in LCD module circuit design, especially for automotive purposes - Low cost circuit design expertise - Firmware design, C programming , Microcontroller selection etc This is a great opportunity to showcase your skills, and contribute to a product that blends...

I'm looking for a proficient programmer to help develop a program for a dsPIC microcontroller. It will be utilized for signal processing. Key Requirements: - Proficient in C language programming - Experience programming dsPIC microcontrollers - Prior experience in signal processing The ideal candidate should have: - Strong understanding of C programming - Knowledge of how to develop for dsPIC microcontrollers - Previous experience in signal processing will be advantageous The attached file has the flowchart of the algorithm for which the microcontroller should be programmed Feel free to provide examples of similar projects you've worked on in the past when applying.

I'm looking for a freelancer who is proficient in using the Proteus Design Suite for an intermediate-level simulation project involving an Arduino microcontroller. Key Requirements: - Proficiency with Proteus Design Suite: The ideal candidate should have prior experience in creating and executing simulations using this platform. - Intermediate-Level Microcontroller Simulation: The project involves simulating an Arduino microcontroller which requires a good grasp of microcontroller programming and circuits. - Attention to Detail: The successful freelancer will need to ensure high accuracy in the simulation results. - Timely Delivery: The project has a set timeline, which the freelancer should adhere to strictly.

...create a PCB layout that is as compact as possible while maintaining functionality and manufacturability, derived from an existing schematic design. The PCB is for an EMG (Electromyography) monitoring device, which requires precision and stability in signal handling. PCB Size Constraints: The final PCB should be no larger than 50mm x 35mm. Please optimize the layout to use the available space efficiently while adhering to all design rules and ensuring signal integrity. Layers: Design is expected to be a multi-layer PCB to accommodate compactness and routing complexity. Suggest the optimal number of layers for this design based on your professional assessment. Critical Components and Placement: The microcontroller unit (MCU) should be central...

...design and implement embedded software for a microcontroller-based system. The software should have the following key functionalities: - User Interface: The software should have an interactive and user-friendly interface to allow users to easily interact with the system. - Real-time Processing: The software needs to work in real-time to process data and respond to user inputs without any noticeable delay. - Data Communication: Implement robust data communication functionality to ensure seamless exchange of information between the system and external devices or networks. The project involves: - Developing the software from scratch. - Writing clean, efficient, and maintainable code in C++. - Extensive testing and debugging to ensure the s...