Blueprint calibrationtrabajos

I need to adjust one set of measurements, Slight object modification, Blueprint with measurements. The current file i have is from Solid works 2015.

We are looking for a medical kiosk to be designed for administering injections. We already have a visual concept already in place, we just need it modified and a full blueprint to begin construction

I'm looking for a electronic designer with proved experience in custom electronic design with MEMS magnetometer and magneto-inductive magnetometer like PNI corporation. The skill must cover also design with Soft- and Hard-Iron Calibration software and tilt compensation. The project concerns the design of a mobile board with CPU able to continuously register the magnetic north degrees.

Hi. I´m looking for a person that can make 3D models of apartments and buildings. I run a very popular real-estate photography service in Iceland. Now I´m looking for a person that I can work with making 3D models of apartments. I might need some 2D work too. This time I need to get a quote on 3D work. I have attached a blueprint of the apartment. Can you please give me an offer for this work? If all goes well I hope to give you much more work in the future :)

...dose of light. The dose of light is calculated by an app on an android phone based on simple input from the user. This is then sent via Bluetooth to the light module. Project Detail: We are looking for an Android App Programmer to add several features to a functional app and provide documentation around app programming. A few features needed: • Admin mode (normally locked out) for simple calibration, entering patient information and outputting use data • Collecting data around daily treatment dose and using this data to calculate next dose using set algorithms • Locking out all other functionality on this dedicated phone • Correctly handling outputs from sensors on light unit (communicated via Bluetooth ) to prevent user error Luma Therapeutics will...

Hello, Freelancers. I am working on an audio calibration video and instead of just showing a static overhead shot of a room, I would like to take an existing 3D model from turbosquid and animate an entry to the room and then have the camera rise above the room like a virtual jib shot. From this frozen frame, I would then launch into a separate portion of the program where I play audio tests. The purchased room model includes a sofa, a coffee table, walls, a window, a television and some speakers. There would potentially be 5 versions of the animation, basically adding or removing additional speakers for the following configurations: 1) 2.0 stereo 2) 2.1 sound bar 3) 5.1 surround 4) 6.1 surround 5) 7.1 surround I would also like to play a 15 second video on the...

****PLEASE READ CAREFULLY**...with big words and complex conceptsrn*Must be willing to research into relevant topics (Neuroscience, Virtual Reality, Cognitive Enhancement, Alzheimer's Disease, etc.)rn**Bonus: I am really looking for an individual with some sort of background or strong interest in Neuroscience (or something similar/relevant)rnrnAlso, I have a self-written rough draft I will provide the writer as a blueprint. I already know, to an extent, how I want the paper set up [the paper will contain an intro, three'ish body paragraphs (each regarding a point I want to convey - which are covered in the rough draft which will be provided) and a conclusion]. However, writer will have freedom to do with the paper as they see fit. rnrn**Looking for EDITING an...

Hi, I need a Through the Wall Target detection project. Th...project. There are many similar projects. I have attached some of them on the attachments below and I need a basic project like detecting a target behind the wall. Matlab should be use during the project. Programmer must be proficient in MATLAB. - Programmer must deliver the following outputs: - An output of object behind the wall. - Signals on frequency and time domain. - Something like Calibration and Preprocessing steps on the "Imaging of the Building Contours with Through the Wall" will be appreciated. All simulation must be done using MATLAB. For each simulation, write down the comments for each step of the simulation, to provide easy understanding. Date of Completion: 3 simulations to be d...

Application will read data over serial port, validate, filter, and display results (scaled value and volatility). Some incoming error checking and a wizard to run calibration process. "Record" button will prompt for tag and store tag & label in a table. Table can be copied/pasted into Excel etc. Option to save/load calibration and recorded data to/from file. Prefer Visual C++ 2010 Express, so it will run on XP and can be modified and recompiled without a Visual Studio license.

We need help to fill our SEOshop template with content. I ordered the SEOshop Template "Blueprint" by crivex. The Template looks very good, but we need futher help to fill it with content. Here is our website: We build a wireframe, that you get an idea how our new design should look like. I think the most content from our wireframe is easy to build. We also know, that a few things are very difficult to change in SEOshop. In this case we also can find compromise to realize it in a other way. For us it is not important, that everything is done 100% like in our wireframe. For us it is important that we get help and start to work on it. Logo, icons and text we will deliver. Please feel free to contact us for further questions

1- i need modeling for a human cartoon Character, i want use it on animation. i have a reference images on perspective mode not blueprint 2- i need (full) rigging and ready to do perfect animation on maya only not 3D max. i want pay 150$ for character but if your expert on Rigging and Modeling, i'm ready to pay more, and i have about 10 characters.

If you're good at those things let me know what the project rate is for a CRUD app. I'll take care of UI, I just need help building the business logic and app blueprint. Less than 10 models (best guess) and I will lay out all the business rules clearly. Simple many to many relationships

Need an aluminum clamp 6061 machined to blueprint, or made to blueprint. It pays $3.50 US Dollars per part. First amount would be in a quantity of 1,000 totaling to 3,500. Would need one part first in order to inspect it is accurately made.

Bottling and labelling engineering blueprint layout design drawingrnyou will provide me with a schematic for a bottling labelling production linernit has to be real enough but is only for a schematic use not a true manufacturing blueprint to be constructed usernreally just for my own usernrn

I need a MC access program that will list my amazon listings to eBay: Details: It should download all amazon listings to the database, and should have a filter "FBA" "FBM" Should have an option to upload a CSV file to update...file too. Each listing need to be individual listings not variations. Should not be compiled, and source code and application must be provided that if I want to add something another programmer should be able to work on it, as well as help and support with installing and making sure it works. Should have the option to add some minor options in middle the work. Please Wirte me a full blueprint how you want to make it and what the program will do, so I know that you understand the project Wirte the word "eBay&q...

We are looking for a professional for making a 3D model of our new product. It is a type of audio enhancer for mobile phones. This 3D model would be later used to describe the product to our manufacturers. For this reason we will need a blueprint of the model after it is done with exact parameters. We will also use the 3D model for advertising purposes. We will need a rendered image that places the product in a real life space. What we need is someone who keeps deadlines as we are working with a schedule. In return we will also keep our end of the business to the deadlines we promise, so nobody has to waste anybody's time. We are offering an opportunity to help launching off our new product. If this business turns out to be a pleasant experience for both parties, there will ...

Looking to create a budgeting app extremely similar to the Mint App that is already available. PLEASE VIEW FIRST and if you are not qualified to EASILY recreate the Mint app, there is no need to apply and waste our time. Obviously my idea will make the budgeting concept unique and will require VERY advanced programming. I am willing to share my blueprint, video, and graphics with serious inquiries only! A NDA and PNC (promise not to compete) must be signed prior. So if you feel confident that you can bring to life a more advanced version of the mint app please apply ASAP. Looking to have it on the market before the apple watch releases March 2015.

Work on Frontend Backbone/React app with Web Components. Implement blueprint for new architecture and help implement new Forvetbet with team in Costa Rica.

Work on Frontend Backbone/React app with Web Components. Implement blueprint for new architecture and help implement new Forvetbet with team in Costa Rica.

I have a 1 page, old blueprint of a house, that needs to be redrawn with measurements to scale, into autocad & saved as an autocad and pdf file. No need for original owner or architects names, within 24-48 hours

Hi, this should be fairly straight-forward for the right freelancer. Attached is a movie created by a previous 3D modelling I worked with. I need a new and very similar model & animation prepared. The deliverables are: 1. 3D model (file format preferably compatible with blender) 2. A schematic view of the model that looks like a blueprint - with front, side and top views. 3. An animation of the microscope in operation. It should look photorealistic, similar to the attached movie. Feel free to do better! Before bidding please note you need to give an example you can provide the deliverables above.

...forceps) 2- slide 2 is animation clip taken from the youtube clip from minute 1:44 to 2:15, with sound remove the words in the clip (sample use only ...nucleous...2009 etc) if not possible crop the clip from below to keep the clip starting just above the word (nucleus) and keep (sample use only ) 3- second animation, use the prerviuos clip as a blueprint to make this clip, should be an animation clip just like the previous clip starts with (first invention without scissors or forceps) with black background, for 3 seconds then clips starts: use figures, 7a through 7f (two separate files) the drawing of the device should show how the skin goes inside the cylindrical part (had to be drawn transparent) s shown in the figures no need to list the

I have written an eBook that is called Twitter Domination 2.0. It covers how to build a large following on Twitter, by covering each step in the process. It covers additional areas such as posting articles and what to avoid. I need someone to partner with me as an affiliate and get sales of the eBook. Let me know what percentage you need and how many sales a day you can provide me. Plus the total cost of the project.

The business plan is the blueprint for your business. You wouldn't walk over to an empty lot and just start nailing boards together if you wanted to build a house. Starting a business without a business plan is just as foolish. reason of business plan To test the feasibility of your business idea. To give your new business the best possible chance of success. To secure funding, such as bank loans. To make business planning manageable and effective. To attract investors.

...identifying prognostic factors for the subsequent development of a disease. The dataset consist of the outcome variabile and the time to event, and approximately 10 indipendent variables (prognostic factors). I want to carry out the analysis as in the papers attached to this post. Particularly: - univariate and multivariate cox - c index, LR chi squared, AIC, and calibration cox chi squared - net re-classification improvement with calibration and global model fit Either SAS and R are suitable for carryoung out the analysis. Probably, as in most papers they are using SAS for carryoung out this type of analysis, it would be easier with that (there should be a macro on the internet for that) than with R. In any case, as I am learning SAS and R, I would like to receive th...

...identifying prognostic factors for the subsequent development of a disease. The dataset consist of the outcome variabile and the time to event, and approximately 10 indipendent variables (prognostic factors). I want to carry out the analysis as in the papers attached to this post. Particularly: - univariate and multivariate cox - c index, LR chi squared, AIC, and calibration cox chi squared - net re-classification improvement with calibration and global model fit Either SAS and R are suitable for carryoung out the analysis. Probably, as in most papers they are using SAS for carryoung out this type of analysis, it would be easier with that (there should be a macro on the internet for that) than with R. In any case, as I am learning SAS and R, I would like to receive th...

...complete the functionality of the product. The product From an electronic perspective, the MCU has 2 momentary switches connected to it. It has an output to a device acting as a current sink and input from a clock signal. Product functions: 1. When the calibration switch is pressed the MCU will sweep through the digitally controlled current sink settings (256) and record the input clock signal resulting from the current being applied. The current biases an external oscillator. After all the settings are being swept through, there should be a calibration LUT with the values read or coefficients for a formula that describes the oscillator’s frequency as a function of the current applied to bias the oscillator (more specifically the code that was set to the current sink...

Need someone to produce a blueprint of a new patented paper clip design. Have original drawing that the patent ofc wants improved.

working to design a video game concept that can work in C++ or in blueprint scripting language. Need a programmer that can turn instructions into concepts

...complete the functionality of the product. The product From an electronic perspective, the MCU has 2 momentary switches connected to it. It has an output to a device acting as a current sink and input from a clock signal. Product functions: 1. When the calibration switch is pressed the MCU will sweep through the digitally controlled current sink settings (256) and record the input clock signal resulting from the current being applied. The current biases an external oscillator. After all the settings are being swept through, there should be a calibration LUT with the values read or coefficients for a formula that describes the oscillator’s frequency as a function of the current applied to bias the oscillator (more specifically the code that was set to the current sink...

I need this blueprint/image as a vector image so I can then print in a large size illustration (110 x 75 cm). The work needs to be neat, clean and resemble every single detail of the original (background color, stains, penmanship, spots, paper cuts, etc.) I'm a very detail oriented person and expect high standards from whomever is awarded this project.

... We need: a) Photorealistic images of the house with typical German environment. (See “Sample-3D Photorealistic file) b) We want to see the house from 3 different sides. So we need 3 photorealistic rendered images from each house. We need high resolution to print it on big banner or in print-documents. (300dpi and at least 3000 x 3000) We will deliver A) 2D drawing/blueprint as of each house type by Spirit CAD software and b) a 3D model () which will be generated and exported by the spirit design software. All other design work, modeling and attraction design work (textures, flora, garden furniture, animation, and so on) must be done by the freelancer. Please see this link, there you see what we will deliver as data files. This are the files of

...the functionality of the product. The product From an electronic perspective, the MCU has 2 momentary switches connected to it. It has an output to a device acting as a current sink and input from a clock signal. Product functions: 1. When the calibration switch is pressed the MCU will sweep through the digitally controlled current sink settings (256) and record the input clock signal resulting from the current being applied. The current biases an external oscillator. After all the settings are being swept through, there should be a calibration LUT with the values read or coefficients for a formula that describes the oscillator’s frequency as a function of the current applied to bias the oscillator (more specifically the code that was set to the current sink). Th...

I have a software for custom printer .. I want to modify the software to be more efficient, easy to install, easy to use, and nice looking One of the problems with using the current software that the driver of the printer is being installed on main drive (usually called C) while the software itself must installed on the alternativ...installed on the alternative drive (usually called D) .. Also, the process of installing it includes lot of steps that it usually hard for non professionals with computer use. The printer is targeted for customers who usually doesn't not lot of things about computer and they face lot of problems in installing it. The design of the software itself is a bit hard to use especially for calibration. more details will be shared with the ...

the aim is to make a 2D image simulation at night artificial lighting of a place in France. This will be done in two steps validated by us. The first step is from a photograph to make quickly study preview with Adobe Photoshop software for studying black and white values at least three ve...photograph to make quickly study preview with Adobe Photoshop software for studying black and white values at least three version and framing composition and color version of at least three (like concept art / speed paint) 2 days. Once validated together the preview, you have up to 3 days to realized the high-quality work, using masks, filter rendering lighting, respect for light angles and blueprint, advanced photo editing. A board such as PDF shows an example of another project the expect...

1 Freelancers viewing right now 1270 TOTAL views Project Description: Hello, I want you to create a desktop software like skype. But the working is different, please read the description below. And I am not awarding project within minutes, so please take some time and create a blueprint/roadmap of the project and explain how will you go forward. 1] It will be a desktop application. 2] It will have the functions to do an audio call to each other(like skype) and share your computer screen with the person or group of persons you want.(like hangout) 3] You will need to register and login(like skype) 4] Send/accept fried requests/chatbox(like skype) 5] It will have options to call and share screen with others. You can do a call or accept/reject call from person at other...

Hello, I want you to create a desktop software like skype. But the working is different, please read the description below. And I am not awarding project within minutes, so please take some time and create a blueprint/roadmap of the project and explain how will you go forward. 1] It will be a desktop application. 2] It will have the functions to do an audio call to each other(like skype) and share your computer screen with the person or group of persons you want.(like hangout) 3] You will need to register and login(like skype) 4] Send/accept fried requests/chatbox(like skype) 5] It will have options to call and share screen with others. You can do a call or accept/reject call from person at other end. 6] You can share with individual or can create a group , you will share scre...

I need a brief summary like a page or less with ideas how to build a ultrasound proof vacuum helmet. Something like a thermus headwear maybe. It does not have to be a ready to manufacture blueprint.

...different "THEME"..... I wanted to be a"BLUE PRINT" Theme. This new site should be CRISP AND CLEAN AND EXTREMELY ATTRACTIVE -If you need to see what a blueprint theme looks like go to google images and type in blueprint website theme(You can choose what you thinks looks best) THE IMPORTANT THING IS THAT IT SHOULD NOT BE VERY EASY TO RECOGNIZE THAT THIS IS THE SAME WEBSITE AS THE ORIGINAL WEBSITE I AM HAVING YOU REDESIGN.......It needs to be revamped and redesigned to look different (eventhough its the same text and products etc) (NOTE: The product covers and representations will be different than they are now and will reflect a blueprint theme- YOU DONT HAVE TO MAKE NEW COVERS) You can leave the existing covers OR submit your own....I will...

Hello, I want you to create a desktop software like skype. But the working is different, please read the description below. And I am not awarding project within minutes, so please take some time and create a blueprint/roadmap of the project and explain how will you go forward. 1] It will be a desktop application. 2] It will have the functions to do an audio call to each other(like skype) and share your computer screen with the person or group of persons you want.(like hangout) 3] You will need to register and login(like skype) 4] Send/accept fried requests/chatbox(like skype) 5] It will have options to call and share screen with others. You can do a call or accept/reject call from person at other end. 6] You can share with individual or can create a group , you will share scr...

Hello, I want you to create a desktop software like skype. But the working is different, please read the description below. And I am not awarding project within minutes, so please take some time and create a blueprint/roadmap of the project and explain how will you go forward. 1] It will be a desktop application. 2] It will have the functions to do an audio call to each other(like skype) and share your computer screen with the person or group of persons you want.(like hangout) 3] You will need to register and login(like skype) 4] Send/accept fried requests/chatbox(like skype) 5] It will have options to call and share screen with others. You can do a call or accept/reject call from person at other end. 6] You can share with individual or can create a group , you will share scr...

I need a brief summary like a page or less with ideas how to build a ultrasound proof vacuum helmet. Something like a thermus headwear maybe. It does not have to be a ready to manufacture blueprint.

I need a brief summary like a page or less with ideas how to build a ultrasound proof vacuum helmet. Something like a thermus headwear maybe. It does not have to be a ready to manufacture blueprint.

I need someone to design me a product and render drawings and blueprint for it.

1. OpenCV c++ code which accepts 40 chessboard images from two different cameras (20 each), and provides calibration data. 2. OpenCV c++ code which accepts one point from each camera picture, and provides the xyz coordinate of that point.

1. OpenCV c++ code which accepts 40 chessboard images from two different cameras (20 each), and provides calibration data. 2. OpenCV c++ code which accepts one point from each camera picture, and provides the xyz coordinate of that point.

1. OpenCV c++ code which accepts 40 chessboard images from two different cameras (20 each), and provides calibration data. 2. OpenCV c++ code which accepts one point from each camera picture, and provides the xyz coordinate of that point.

1. OpenCV c++ code which accepts 40 images from two different cameras (20 each), and provides calibration data. 2. OpenCV c++ code which accepts one point from each camera picture, and provides the xyz coordinate of that point.

Hello, Freelancers. I am working on an audio calibration video and instead of just showing a static overhead shot of a room, I would like to take an existing 3D model from turbosquid and animate an entry to the room and then have the camera rise above the room like a virtual jib shot. From this frozen frame, I would then launch into a separate portion of the program where I play audio tests. The purchased room model includes a sofa, a coffee table, walls, a window, a television and some speakers. There would potentially be 5 versions of the animation, basically adding or removing additional speakers for the following configurations: 1) 2.0 stereo 2) 2.1 sound bar 3) 5.1 surround 4) 6.1 surround 5) 7.1 surround I would also like to play a 15 second video on the...

The first deliverable will be getting orientation adjusted compass heading information from the IMU. I need reasonable accurate compass heading information from the IMU and what makes it a little tricky is that the IMU won't always be flat in my application so we have to adjust for the IMUs orientation- which we get from the gyro and accelerometer. There is also a lot of calibration that goes into the magnetometer to get an accurate compass heading. Fortunately, Invensense does have a datasheet specifically on calibrating the mag and adjusting for orientation- which I can send as well as some open source code that is pretty good at setting up the magnetometer but for some reason it doesn't give me an accurate heading. There is two additional components/deliverables of this...