Cnc microcontroller programmintrabajos

The project is to make a design that uses inexpensive parts that are ready available/in-stock for a power converter/controller to drive three phase motor on 48 VDC. The controller will have a microcontroller to implement the control algorithm, and a power converter to perform fast switching three phases (upon switching signals) handling about 1 kW total. The switching scheme will follow classic asynchronous switching with three states: positive, zero and negative.

I want various designs for CNC cutting machine. You can Google search "Cnc cutting design".

Hi, we need to write down and test a code that will use STM microcontroller or an alternative for reading NFC tags and send info by using a gsm module.

We are trying to implement the above mentioned protocol to transfer data to remote server from assent management/control hardware built around a microcontroller from Microchip. Microchip claims the free stack provided by them i.e. Harmony V3.0 supports this protocol . However , we are having trouble implementing this protocol and the help from Microchip is slow in coming. We need to resolve this fast . The data is sent over an Ethernet connection.

Can anyone make relief of ‘hari singh nalwa’ . You can also find more images on google . I have to use it for cnc engraving

Por favor, regístrate o inicia sesión para ver los detalles.

Two gates to be cut for a school play. My cnc is an scm record 110 and uses xilog plus software so if the program can be in .pgm format that would be good. Each gate to be approximately 2.4m high x 1.2m wide. Upright bars to be no less than 30mm thick. The design can be altered

I want a tracking device with A9G and nuvoton microcontroller. That device will be rechargeable, I want a battery backup of 15 days, which should also be fast and chargeable. You must upload the specific thing on the firebase, latitude, longitude, battery percentage, charger pugged In or not, and device Id. On the side of the hardware, I want that device to be very cheap with good accuracy and smaller in size, I can also change my hardware if you suggest to me any other cheap and better performance. Happy bidding in advace Thanks

Looking for a unique logo design for my company. Business will be selling illuminated signs and CNC machine cut materials. Company name is BELECCO.

...step-by-step with this example then the base microcontroller board used here is the Arduino Nano. Although this project may not suit everyone as it may require working with steel and a welding machine in order to build a sturdy frame. This DIY arcade style boxing machine project can be found at the Arduino Project Hub where you can discover how this guy did it. This pushup counter uses an infra-red proximity sensor to detect your face with every pushup. Not only will it keep track of how many pushups you do but it will also help detect whether you achieved a valid pushup so there’s no cheating yourself in the process. If your face isn’t close enough to trigger the sensor then you didn’t lower yourself down far enough! The Arduino Uno microcontroller b...

You can see the requirement in the attachment file. Also, it needs some report with maximum 2 pages as PDF. Thank you.

Write blog posts about cnc machining, rapid prototyping and injection molding every post should obey the seo rules and not less than 1000 pics in the article will be made by yourself. If you can, videos are needed too on the Youtube.

...need any experience but you must prove to me that you are able to think logically. You will normally work 1 hour/day (20 days/month). ✻ THE PROJECT ✻ You do *not* need an ESP32 (which is similar to Arduino). You will help me build a consumer IoT (Internet of Things) product using MicroPython on the ESP32. MicroPython is a subset of Python used to program microcontrollers. ESP32 is a microcontroller (similar to Arduino) but ESP32 is generally better and more powerful than Arduino. ✻ DAILY PAYMENT ✻ I will pay you each day for every hour you work with me. ✻ WORKING DAYS AND TIMES ✻ You will normally work 1 hour/day (20 days/month) for one hour on Sunday, Monday, Tuesday, Wednesday and Thursday at a time that is convenient for you. ✻ PAYING YOU TO LEARN ✻ No. Yo...

Looking for someone who works with SVG files, NEEDS TO UNDERSTAND WOODWORKING, engineering and really basic CNC functionality. Ultimately these files will be used by Shaper origin., the files must be in inches Looking to insert these trees into a countertop. As of right now we are only using 1,2,3,6,10,16,17,18. If it is an easy process for you to make these good for Origin go ahead and do all of them incase my customer changes his mind but concentrate on only those number if not. They will be about 6 inches tall. I would love it if you could optimize these trees to work for origin. My ideal smallest bit would be 1/8” but I do have several 1/16 and I’m assuming I will need them. Going to inlay curly maple into cherry. My plan is to inlay it thicker than the pocket so we...

Planning to build a Metal ( Iron pillar and Iron sheet) Temple for my Society where I live. Going to propose a Temple design to Society Management team. For this I need a 3D design of my concept. Everything will be constructed by using Iron and steel sheet( for CNC covering/aesthetic )

I am looking for someone who is experience in designing and closing vectors, and ready them for CNC machining.

use microcontroller with camera to activate a solenoid to when an image is detected

i want the study to be about Cnc machine here in riyadh the capital city of saudia arabia

...need any experience but you must prove to me that you are able to think logically. You will normally work 1 hour/day (20 days/month). ✻ THE PROJECT ✻ You do *not* need an ESP32 (which is similar to Arduino). You will help me build a consumer IoT (Internet of Things) product using MicroPython on the ESP32. MicroPython is a subset of Python used to program microcontrollers. ESP32 is a microcontroller (similar to Arduino) but ESP32 is generally better and more powerful than Arduino. ✻ DAILY PAYMENT ✻ I will pay you each day for every hour you work with me. ✻ WORKING DAYS AND TIMES ✻ You will normally work 1 hour/day (20 days/month) for one hour on Sunday, Monday, Tuesday, Wednesday and Thursday at a time that is convenient for you. ✻ PAYING YOU TO LEARN ✻ No. Yo...

Por favor, regístrate o inicia sesión para ver los detalles.

...need any experience but you must prove to me that you are able to think logically. You will normally work 1 hour/day (20 days/month). ✻ THE PROJECT ✻ You do *not* need an ESP32 (which is similar to Arduino). You will help me build a consumer IoT (Internet of Things) product using MicroPython on the ESP32. MicroPython is a subset of Python used to program microcontrollers. ESP32 is a microcontroller (similar to Arduino) but ESP32 is generally better and more powerful than Arduino. ✻ DAILY PAYMENT ✻ I will pay you each day for every hour you work with me. ✻ WORKING DAYS AND TIMES ✻ You will normally work 1 hour/day (20 days/month) for one hour on Sunday, Monday, Tuesday, Wednesday and Thursday at a time that is convenient for you. ✻ PAYING YOU TO LEARN ✻ No. Yo...

Commercial and residential software

I need 2 letters of recommendation for the real estate commission in my state. Will include sample of one that was written for me. Thank you Write one in the perspective of my employer where I've worked with you at: 1. Produce company doing office work (accounting assist) 2. Restaurant as an assist manager 3: CNC machining company as a machine assist

Hello, As discussed, I need you to build a custom desktop application in C++ which will involve a modern looking GUI. Basic requirements are; - image processing - g-code generation - cnc programming. thank you.

Hello, Looking for someone who can help me Create a CNC Program for machining a multi-gear shaft on Solidworks More details on private

Hi guys, I have a few small car parts that I need CAD drawings for. Some of the parts are flat shapes which need to be cut and bent, or milled on a CNC lathe. I've attached photos for reference. Let me know if you can help. On this occasion i will only work with UK/EU based workers as I cannot risk losing the original parts in transit. Thanks.

We are currently have a product in development that contains a simple PCB that contains an ATtiny microcontroller and a stepper driver. Looking for somebody with in depth experience with electronics of this nature. ***MUST BE WITHIN AUSTRALIA*** (preferably Melbourne) as shipping international is too time-consuming and expensive.

...need any experience but you must prove to me that you are able to think logically. You will normally work 1 hour/day (20 days/month). ✻ THE PROJECT ✻ You do *not* need an ESP32 (which is similar to Arduino). You will help me build a consumer IoT (Internet of Things) product using MicroPython on the ESP32. MicroPython is a subset of Python used to program microcontrollers. ESP32 is a microcontroller (similar to Arduino) but ESP32 is generally better and more powerful than Arduino. ✻ DAILY PAYMENT ✻ I will pay you each day for every hour you work with me. ✻ WORKING DAYS AND TIMES ✻ You will normally work 1 hour/day (20 days/month) for one hour on Sunday, Monday, Tuesday, Wednesday and Thursday at a time that is convenient for you. ✻ PAYING YOU TO LEARN ✻ No. Yo...

Hi, I need a mirror similar to the photo done with the CNC(for the front part) in ultralight MDF, then assembled and lacquered with the spray gun for a final result without final work (as in photo) should be sent in italy.

I need a frame similar to the photo, just the front part in ULTRALIGHT MDF made with CNC

Por favor, regístrate o inicia sesión para ver los detalles.

Hi Ciro L., If you accept this project, we'd create a good budget for you. We have an assembly language assignment that is based on the 8051 microcontroller. We need to essentially recreate an I2C command set and 'bit-bang' I2C on some GPIO pins. Do you think you can do such a thing for us?

Need to develop a display-based video player where audio is also essential for the same video. Videos will be played via SD card. A microcontroller is required for the same operation to reduce cost. Developers can use Arduino-based ICs or ESP or any other low-cost MCUs.

The board will have 2 main functions. First, 4 gpios will be used to send PWM signals to a 4in1 ESC to control 4 brushless motors. (Wired control thru an ADC pin set) A tri-state 4 channel bus converter will be needed for outputting 5V PWM ( something like 74ahct125 ). Second function will be controlling a linear solenoid with onboard MOSFET and diode.(Solenoid power consumption Vout<20V, C~30A) The solenoid cycling speed/frequency will be controlled by a second pin set of ADC. 2 additional switch pin header will also be required to act as on/off to each circuit. Plus A USB C port alone with a reset and boot button. I want the PCB to be as small as possible. Less than 25x25mm/30x30mm. P.S. I want to have direct solderable pads on the board for Vin,GND and Vout GND for the solenoid pa...

...need any experience but you must prove to me that you are able to think logically. You will normally work 1 hour/day (20 days/month). ✻ THE PROJECT ✻ You do *not* need an ESP32 (which is similar to Arduino). You will help me build a consumer IoT (Internet of Things) product using MicroPython on the ESP32. MicroPython is a subset of Python used to program microcontrollers. ESP32 is a microcontroller (similar to Arduino) but ESP32 is generally better and more powerful than Arduino. ✻ DAILY PAYMENT ✻ I will pay you each day for every hour you work with me. ✻ WORKING DAYS AND TIMES ✻ You will normally work 1 hour/day (20 days/month) for one hour on Sunday, Monday, Tuesday, Wednesday and Thursday at a time that is convenient for you. ✻ PAYING YOU TO LEARN ✻ No. Yo...

...need any experience but you must prove to me that you are able to think logically. You will normally work 1 hour/day (20 days/month). ✻ THE PROJECT ✻ You do *not* need an ESP32 (which is similar to Arduino). You will help me build a consumer IoT (Internet of Things) product using MicroPython on the ESP32. MicroPython is a subset of Python used to program microcontrollers. ESP32 is a microcontroller (similar to Arduino) but ESP32 is generally better and more powerful than Arduino. ✻ DAILY PAYMENT ✻ I will pay you each day for every hour you work with me. ✻ WORKING DAYS AND TIMES ✻ You will normally work 1 hour/day (20 days/month) for one hour on Sunday, Monday, Tuesday, Wednesday and Thursday at a time that is convenient for you. ✻ PAYING YOU TO LEARN ✻ No. Yo...

I want a logo for my small business. I mainly do 3D printing and some light laser engraving and CNC. The name of the Business is So i would like to infuse the name with 3D printing. For example maybe the nozzle of the printer can print a word from the name. Or any simple creative idea you have Thanks

Por favor, regístrate o inicia sesión para ver los detalles.

Hello, Need the following images traced in a vector format, preferably in CDR or AI. This is to be used for CNC cutting. Please see video below of what the expectation is for the trace; Please see the 5 samples attached of the files that need to be traced. We need this type of work done all the time. So if your good, you will get a lot of work out of us.

I am trying to build a CNC 4 axis desktop mill of with a budget of 3k-5k and need guidance on what kind of motors I should use and spindles. Something that resembles a grizzly mini mill but with a 4th axis .I want to mill: 416 Stainless steel 4140 steel aluminum wood I want a video meeting with these questions with 1 hour of your time

I have a board with just the NRF5340 as microcontroller and audio amplifiers through I2S. It´s almost a standard bluetooth speaker and the job is the complete programming of it (buttons, energy management, audio receiving and playing, etc) based in the user manual. There is no SD cards or file management. There is a user manual already written.

Looking for designer to convert photo into 3D design. To be carv on wood with CNC router. Designer shold good hand on Artcam software.

...make a complete design for a rubber track motorcycle to run on batteries, it should carry two persons and consist of single rubber track and an electric hub motor of 5 kw are lenghth 1.6meter Hight is 90cm, track width 25cm and total width 40cm The truggy should have headlight and tail light and should reCh speeds up to 40km/h Track frame and body should be made of sheet metal cnc cutted and bent, The used motor is brushless outrunner hub electric motor usually used for electric scooters with a diameter of 15cm and a peak power of 5kW The rubber track dimensions is 160cm* 25cm with centered teeth meshing Rollers should be designed from standard size steel pipe with standard vall bearing Front and rear suspension is needed and to be selected from after market spare parts for

The project aims to design map for the following two marina. The purpose of these maps, will be manufactured using CNC on magnetic base which will allow the manager to reshuffle boats / motor yachts on the map from one place to another. Your role is design this in the best possible way - so that it looks beautiful and realistic. @25.32432416,51.54123003,-0.51674384a,430.81251557d,35y,359.96944026h,0t,0r and @25.3917215,51.5307136,1.0286308a,455.64309497d,35y,359.96943306h,0t,0r The idea is that the layout will be sent for CNC shop to cut

...light source device : - 3d modeling for all parts (3d and 2d design ) - Technical/ fabrication drawings (manufacture's drawings) - manufacture and production recommendations ( including but not limited to : material recommendation , BOM , Production process advises, …. etc ), in simple words we need to know the best options of material for each part and its fabrication process ( molding , welding , CNC ... etc ) - calculus of stability (physical analysis , FEA reports with different materials that we are considering to use ) - simple video for the assembly steps - one of the most important steps is to confirm the fit and the sizes of the lamps, connections, and drivers in each part - deciding the assembly process effect on the shipping boxes' sizes. The 3D rend...

...need any experience but you must prove to me that you are able to think logically. You will normally work 1 hour/day (20 days/month). ✻ THE PROJECT ✻ You do *not* need an ESP32 (which is similar to Arduino). You will help me build a consumer IoT (Internet of Things) product using MicroPython on the ESP32. MicroPython is a subset of Python used to program microcontrollers. ESP32 is a microcontroller (similar to Arduino) but ESP32 is generally better and more powerful than Arduino. ✻ DAILY PAYMENT ✻ I will pay you each day for every hour you work with me. ✻ WORKING DAYS AND TIMES ✻ You will normally work 1 hour/day (20 days/month) for one hour on Sunday, Monday, Tuesday, Wednesday and Thursday at a time that is convenient for you. ✻ PAYING YOU TO LEARN ✻ No. Yo...

- I am looking for someone to help me with preparing the drawings for joinery jobs and export to the cnc. - The softwares we use are cabinet vision and Mozaik. - at first it will be by by project, and soon will be a full time job.

I'm looking for freelancers who have deep expertise in firmware development for ARM-core based microcontroller devices . Interested freelancers are invited to place bid for the same . We already have a code-base for the device . We need some features-addition in this . Knowledge of C programming is mandatory.

I want an electronics engineer who can design me a tracking device, I want to receive the location over the internet using a sim and the device should have a battery also, That needs to be the smallest and cheap you can use any module, ATMEGA328p, RP2040, and chip any microcontroller. Tell me the device hardware costing and Your development costing Also, tell the PCB costing for this project

Hi! I need someone who can do a CNC Pipe Bending Machine in Solidworks. Payment can be negotiated.